[C320-list] Sail cover logo was Modifying The Sail Cover to Accommodate Dutchman System

[Jeff Hare]

It's been quite some time.  Maybe not going to restart...  We're making a
few new sets so I'll let you guys know how they come out.

-Jeff Hare
#809

-----Original Message-----
From: C320-list <c320-list-bounces at lists.catalina320.com> On Behalf Of Chris
Burti
Sent: Monday, January 7, 2019 3:01 PM
To: C320-List at catalina320.com
Subject: Re: [C320-list] Sail cover logo was Modifying The Sail Cover to
Accommodate Dutchman System

Be patient until you can order again. You can sew this one right over the
old which is what we did on our first cover when the silkscreened logo
deteriorated. They have held up so well that we had them removed and sewn on
the new cover. 

Best Regards,
Chris Burti


> On Jan 7, 2019, at 12:59 PM, Gerald Rouillard <pearson39b at yahoo.com>
wrote:
> 
> Thanks Chris.  I found them, but they have a notice posted that says they
are not currently taking orders because of a "family emergency."  I also
looked at Catalina Direct, but their price is 4x higher.  Wish I knew some
way to just get the old one off, short of scraping it away.
> 
> Sailor Jerry
> Wind Song, Hull #283
> 
> Sent from my iPad
> 
>> On Jan 7, 2019, at 8:39 AM, Chris Burti <clburti at gmail.com> wrote:
>> 
>> We bought ours here: www.Sailboatlogos.com
>> 
>> Reasonably priced, looks good and has held up very well.
>> 
>> Chris Burti
>> Commitment #867
>> Farmville, NC
>> 
>> 
>> 
>> On Sat, Jan 5, 2019 at 11:51 AM Gerald Rouillard 
>> <pearson39b at yahoo.com>
>> wrote:
>> 
>>> Thanks to everyone for a very informative discussion.  Jeff's comments
>>> about soiling the sail were particularly persuasive.   I'm close to a
>>> railroad and we already have trouble keeping the boats clean, so 
>>> that issue got my attention right away.
>>> 
>>> For the moment, I'm going to leave the cover uncut and see if I can 
>>> get better at dealing with the slack filament lines.  In the 
>>> meantime, I'm taking the opportunity to resew failing seams on the 
>>> cover and look for reasonably priced Catalina 320 logo panels to 
>>> cover up the badly degraded ones I currently have.  Suggestions
welcome...
>>> 
>>> Sailor Jerry
>>> Wind Song, Hull #283
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> Sent from my iPad
>>> 
>>>> On Dec 31, 2018, at 8:50 AM, Gerald Rouillard 
>>>> <pearson39b at yahoo.com>
>>> wrote:
>>>> 
>>>> I have a Dutchman system, but the sail cover does not have openings 
>>>> to
>>> accommodate the lines.  The previous owner simple slacked the system 
>>> and gathered the loosened lines underneath the cover when he put it 
>>> on the sail.  IT makes for a very messy process, so  I'm going to 
>>> modify the cover to let me keep the lines up when the sail is 
>>> stowed.  Just wondering if anyone else has done this, and if they 
>>> have any advice for me before I tear into it.  I have a Sailrite, 
>>> walking foot sewing machine and some time to work on it now, so any 
>>> help would be appreciated,
>>>> 
>>>> Thanks,
>>>> Sailor Jerry
>>>> Wind Song, Hull #283.
>>>> 
>>>> Sent from my iPad
>>> 
>>> 
>