[C320-list] Need ST4000 Autopilot Manual Supplement

[Chris Burti]

I was told by a Raymarine tech how to force a reboot and that solved my
problem at the time, but it was so long ago that no longer remember...
Chris Burti
Farmville, NC



On Tue, Jul 23, 2019 at 8:42 AM Scott Thompson <surprise at thompson87.com>
wrote:

> Is it possible you have the ST4000 Plus? I have a manual for that, which
> came with hull #653 in 1999, and it is very different from the one
> linked below.  It has a section on Dealer Setup that describes accessing
> the calibration settings. The control head for the ST4000+ is not the
> same so you should be able to tell which you have.
>
> Also, have you tried the help forums on the Raymarine website? I've
> found them to be helpful on questions like this, albeit not recently.
>
> Scott Thompson
>
>
> On 7/22/2019 2:37 PM, Dave Hupe wrote:
> > Chris - thanks, I have that manual. I had also previously found the
> suggested settings summary on the 320 association website (although, I
> question a few of those suggested settings after comparing them to the
> manual). The problem is I tried several times to get into the calibration
> mode to check the settings and could not get in. I even tried toggling the
> part where you can disable calibration access mode (to prevent inadvertent
> changes) but still can't get to the settings screens. As I said, there is a
> 4 page supplement to the main manual that has a small section in it related
> to entering calibration mode.  I can't read my copy well enough and
> couldn't find the supplement online. I think that little supplement has a
> key instruction I need to properly get into calibration mode.  Hopefully
> someone has this old 4 page supplement and can help me.
> > Dave Hupe
> > 1994 Cat320 (#32) "Mayan Sun"
> > Holland, MI
> >
> >      On Monday, July 22, 2019, 11:36:01 AM EDT, Chris Burti <
> clburti at gmail.com> wrote:
> >
> >   This may be a link to what might be a later edition that might have
> > incorporated the supplementary material...
> >
> >
> > https://raymarine.app.box.com/s/nwf2s5ha9xrltggghogu/file/3273060377
> >
> > Chris Burti
> > Farmville, NC
> >
> >
> >
> > On Sun, Jul 21, 2019 at 4:21 PM Dave Hupe <hoopdtwo at yahoo.com> wrote:
> >
> >> I have an old Raymarine Autohelm ST4000 system (still working) that came
> >> with our boat when we bought her in 2017. Regrettably, my manuals were
> >> soaked and mildewed when I bought the boat because there was a window
> leak
> >> that had dripped into our navigation station.  So, most of the pages
> were
> >> stuck together.  I've found the manual online, but can't find the
> >> supplement (4 pages) which is titled  "Autohelm Seatalk Autopilot
> Operating
> >> Supplement".  It has a section in it about calibration that I can't read
> >> and may help me, since I'm trying to check all the settings, but can't
> get
> >> into the calibration mode.  Does anyone have the printed "supplement"?
> >> Dave Hupe
> >> 1994 Cat320 (#32) "Mayan Sun"
> >> Holland, MI
> >>
> >
>
> --
> Scott Thompson
> Surprise, #653
>
>