[C320-list] Bomar Trapezoidal Hatch
Chris Burti
clburti at gmail.com
Sat Oct 19 15:41:06 PDT 2019
I believe it is a Bowmar, but can’t say I’m certain.
Best Regards,
Chris Burti
Commitment #867
> On Oct 19, 2019, at 5:34 PM, Troy Dunn <troutwarrior at gmail.com> wrote:
>
> I replaced the lens at the same time I replaced the gasket so I didn't
> attempt to replace the gasket only. Based on what I saw while
> disassembling the hatch frame I would say it is probably very simple to
> replace only the gasket.
>
> Couple things with making the gasket. First, use a very sharp razor blade
> and press firmly perpendicular to the gasket to get a nice clean cut.
> Second use the super glue VERY sparingly. 6 drops placed strategically
> around the middle of the cut will be plenty...more glue will just leave
> hard spots in the gasket that might not seal.
>
> Chris, are your hatches Bomar? I thought they switched to Lewmar hatches
> on newer hulls. I could swear my hinge screws penetrated the deck,
> but....would not bet my boat on it.
>
> Troy
More information about the C320-list
mailing list