[C320-list] Current Shunt mounting

[Dell Kronewitter]

Thanks for the help everyone.  I do see some odd holes under the nav station seat,  I bet thats where it was.   
Thanks for the info! Dell 


    On Sunday, March 29, 2020, 04:15:20 PM PDT, Scott Thompson <surprise at thompson87.com> wrote:  
 
 If you start at the battery monitor the wiring from there should connect 
to the shunt, so that's one possible way to find it. Of course if the 
monitor is not working that could be because that wiring is gone or 
broken somewhere.

On 3/29/2020 5:13 AM, Graeme Clark wrote:
> My shunt(s) - which are for a different make - are in the locker below the port settee, basically below where you sit at the nav station.
> This was a convenient point to split the cables from the batteries which pass under the cabin sole then up behind the liner to the electrical panel.
> Hope this helps
> Graeme
> #366, 1996
>
> Sent from my iPad
>
>> On 28 Mar 2020, at 22:23, Dell Kronewitter <dell at ieee.org> wrote:
>>
>>  Hello Fellow C320'ers,
>> I have a Link 10 Battery Monitor device in my C320, but it doesn't work correctly.  It seems so cool!  It does read the voltage.
>> I have looked around and can't find the shunt.  My setup seems to be pretty standard.  She has 1 12V on Battery 1 and 4 6V on Battery 2,  and Battery 1 only gets a charge from the AC charger if I'm on "Both".  Previous owner did lots of good stuff and I'm pretty sure everything worked at one point - I'm just trying to keep up.
>> Does anyone know where the shunt might be mounted?
>> Thanks a lot! Dell Kronewitter1996 C320 Hull #329      "Checkmatey"
>>