[C320-list] Fridge Lid Soft Close Solution Needed

[kskis at aol.com]

Gary:  I think I remember there being close tolerance that prevented using larger hinge because very close to the back wall.  The hinge is very strong and easily holds up the covers.  It's a game changer.  Neil Harmony


-----Original Message-----
From: Gary Guilbeaux <gguilbeaux at gmail.com>
To: C320-List at catalina320.com
Sent: Tue, Aug 18, 2020 11:22 am
Subject: Re: [C320-list] Fridge Lid Soft Close Solution Needed

Thanks everyone for some great responses.  Keep'em coming.

At this time, I really like Neil's suggestion of the Gemlux Friction
Hinges.  If I go that route, I'll probably use the Gem Lux Stainless Steel
FH-9605-TM Friction Hinges.  They have three holes on each side and look
like they'll either work with or cover the existing hinge holes.  I'd
probably fill the existing holes with an epoxy, if they are not used.

If anyone else has other experience with these hinges, please let me know.

Thanks again,

Gary Guilbeaux
Lil' Bit of Paradise
Hull #634
gguilbeaux at gmail.com


On Tue, Aug 18, 2020 at 7:28 AM <kskis at aol.com> wrote:

> Gemlux Friction Hinge #FH-1172 work amazing.  I did a few years ago and
> can't quite remember but I believe I used existing holes (or maybe
> redrilled a few but are now covered).  Easy install.  I also used for the
> two aft hatch covers with a different style.  That install was a bit
> trickier but now those covers don't fall against the wheel!  Neil Kornblatt
> Harmony #973.
>
>
> -----Original Message-----
> From: Age Of Aquariums <dan at ageofaquariums.biz>
> To: C320-List at catalina320.com
> Sent: Mon, Aug 17, 2020 8:46 pm
> Subject: Re: [C320-list] Fridge Lid Soft Close Solution Needed
>
> Same thing Happened to One of my passengers two weekends ago . I was
> thinking of installing a hook to keep it open .
>
> > On Aug 17, 2020, at 5:26 PM, Gary Guilbeaux <gguilbeaux at gmail.com>
> wrote:
> >
> > A friend almost lost the tip of her finger when the fridge lid slammed
> down
> > on it.  Does anyone have a good solution for adding a soft close hinge or
> > gas spring?  My ice box is on the left side of the fridge and is a
> little 5
> > inches below the cabinet lid top.  I'm thinking a gas strut could be a
> good
> > solution, but want to make sure I explore all options and understand the
> > best placement location to ensure I still get a good seal on the gasket
> > when closed.
> >
> > Thanks in advance for your help.
> >
> > Gary Guilbeaux
> > Lil' Bit of Paradise
> > Hull #634
> > gguilbeaux at gmail.com
>