[C320-list] Holding tank monitor recommendations needed

[Allan Field]

John - If you have to order new strips, Tech-Edge is the company that now
supplies them for about $45.00. - Allan

On Sat, Jun 27, 2020 at 8:09 PM John Meyers <jcmeyers7 at gmail.com> wrote:

> Thank you everyone for your responses (I love this group). Allan, I did
> find the article. I have similar strips attached to my holding tank. They
> have been there since I bought the 1997 boat 10 years ago but the gauge
> never worked. I went out to the boat today and discovered that one of the
> wires has become detached from the strips. So I plan to take my solder
> equipment out next time and reattach and hopefully the gauge will start
> reading.
>
> Thanks again everyone.
>
> John Meyers
> Muskegon MI
> #409 Wind Chime
>
> On Sat, Jun 27, 2020 at 10:14 AM Allan Field <allanfield47 at gmail.com>
> wrote:
>
> > We went with the acu-gage Ultra 8 on the C320 and now the C387. You
> should
> > be able to find an article in the Association archives that I wrote on
> this
> > project. This upgrade was close to the best upgrade we ever did on that
> > boat! If you can't find the article, let me know and I will dig out a
> copy.
> >
> > Allan S. Field
> > Sea Shadow - C387, #103 (formerly C320, #808)
> > Columbia, MD
> >
> > On Sat, Jun 27, 2020 at 8:20 AM John Meyers <jcmeyers7 at gmail.com> wrote:
> >
> > > Does anyone have a recommendation for a holding tank monitoring system.
> > >
> > > Thank you
> > >
> > > John Meyers
> > > Wind Chime #406
> > > Muskegon, MI
> > >
> >
>