[C320-list] Replacement Procedure for Temperature Sender Yanmar
Chris White
chriswhite252000 at yahoo.co.uk
Sun Oct 4 05:15:20 PDT 2020
Dino
Drain some of the coolant out at the black plastic tap behind the oil filter.It has a plastic pipe on it which you can direct into a bottle.
Once the new sensor is fitted just replace it at the top via the filler cap.
Regards
Chris WhiteYacht Dandy
C320 #449UK
On Sunday, 4 October 2020, 00:33:51 BST, Dino Martucci <lmcdima77 at gmail.com> wrote:
Thank you for taking a moment to read this..
New CAT320 owner and new member of this forum..
Jost got my 2004 Catalina 320 and the owner advised me with a problem with
the Yanmar Engine temp reading. Using this forum I was able to determine
that I have a faulty sensor and I got the right sensor from "catalina
direct"... so I am all set to go.
By looking where and how the sensor is mounted I would imagine that by
removing the old one coolant would start to leak and I don't want to
replace the coolant now.
So, here it is the question: Can I remove the sensor, drain from there what
comes out as coolant, replace the sensor with the new one and then put
back the old coolant in? I don't think I have seen any previous posts
discussing this..
Thank you in advance for your help.
BR/Dino
Sensor Part link:
https://www.catalinadirect.com/shop-by-boat/catalina-380390/electrical/temperature-sender-yanmar-diesels/?SearchResults=1
More information about the C320-list
mailing list