[C320-list] Microwave that came with the new boat died

[Gary Guilbeaux]

I used the same or similar Danby microwave. I cut the top part of the
opening to match the bottom part.  To make room for a jig saw, I unscrewed
the nuts and pushed the bolts up.

https://c320.org/mediagallery/media.php?s=20201010142657105

Gary
Lil’ Bit of Paradise
Hull# 634


On Sat, Oct 10, 2020 at 8:12 AM Dave Hupe <hoopdtwo at yahoo.com> wrote:

>  Karl-
> Any chance you could provide photos showing how you trimmed the wood
> surround?  I bought the same Danby DMW077BLSDD microwave previously and
> started trying to install it, but couldn't see how it would fit even
> following these 8/22/17 instructions by Rich D:
>
> > <rich.catalina320 at gmail.com> wrote:
> > Greetings,
> >
> > After reading several posts and spending many hours searching for a
> > replacement microwave that fits without boat modifications, I finally
> found
> > a good solution.  Pictures posted on Catalina320, members album Stella
> > Maris.  Model is Danby DMW077BLSDD.  Two plastic feet in the front need
> to
> > be removed.  Rear feet are pressed sheet metal, drill hole and gently tap
> > in with hammer to flush.  There is one small screw that needs to be cut
> off
> > that would protrude below the modified bottom.  Fits perfectly in my 04.
> > Plenty of clearance under unit for ventilation.  Hope this helps.
> > Thanks,
> > Rich
> Thanks,
> Dave Hupe
> 1994 C320 (#32)
>
>
> --
Gary Guilbeaux
C: 512-799-4383
gguilbeaux at gmail.com