[C320-list] engine panel question

[Scott Thompson]

Thanks. Does anyone know what is the right replacement bulb?

On 10/19/2020 1:14 PM, Dennis Cookson wrote:
> Hi Scott, I have the same panel and yes, each instrument has a grey or black plastic bulb holder at the back that can be removed easily to change a bulb. No need to remove the gauge, just the panel screws.
>
> Regards,
> Dennis Cookson
> #577.   1999
>
>
>
>> On 19 Oct 2020, at 17:55, Scott Thompson <surprise at thompson87.com> wrote:
>>
>> I recently did some night sailing, which we do not do very often. When running the engine I noticed that there was no light on the tachometer or fuel gauge (both on the left), in contrast to the voltage and temp gauges (on the right). Does anyone know whether the lights are replaceable separately from the gauges themselves? Given the pattern in might be a loose wire rather than burned out lights, but I'd like to know what are the possibilities before removing the wheel, opening the panel, etc.
>>
>> This is on a Yanmar 3GM30F, 1999 vintage, European model engine. The panel is the standard Catalina panel from 1999.
>>
>> Scott
>>
>>

-- 
Scott Thompson
Surprise, #653