[C320-list] Furling main control line

[Scott Lagerquist]

If you have a drill with an adjustable clutch for driving screws use it.  Set it at a low setting and go fwd until the clutch slips.  Then reverse direction of the drill and do the same.  After four or five times back and forth the screw will come right out.  

Sounds crazy but it works.  

Scott Lagerquist 
1994 320, #39, Sea Esta
San Diego CA


Sent from my iPad

> On Oct 20, 2020, at 3:03 AM, Fishbust <fishbuster62 at att.net> wrote:
> 
> Hi all,
> 
> I need to change my “main in” control line. Never changed by PO, it is shot. 
> 
> The problem is, been there since 2002, SS screw into aluminum inside mast, won’t budge of course, don’t want to snap it and make things worse. 
> 
> Any pointers for getting that screw out?