[C320-list] No power to gauges

[Ian Neale]

Hi,

I had a similar problem recently and couldn’t turn the engine off either. 

In my case the earth cable to the engine block had come out of the crimp connector meaning the engine was no longer earthed. You could check that too. The earth is the big black cable that on my 3YM30 engine attached to the right side of the engine as you look at it from front of the engine. 

Cheers, Ian. 

Hull 1122, Solutions. 

Sent from. my iPhone

> On Apr 24, 2021, at 7:50 AM, ptormey at 4square.net wrote:
> 
> It's likely the key switch. They are open to water and integral to the gauges.
> 
> Pat
> 
> Pat Tormey
> S/V Blue Skies
> Newport RI
> 
> -----Original Message-----
> From: C320-list <c320-list-bounces at lists.catalina320.com> On Behalf Of Tim
> Sent: Friday, April 23, 2021 1:54 PM
> To: c320-list at lists.catalina320.com
> Subject: [C320-list] No power to gauges
> 
> Hi All - fired up the old diesel today and while that went well I noticed that none of my gauges were working. I did get the audible for low oil pressure but nothing on any of the gauges. Will be taking it apart over the weekend but figured I'd pick some of your brains first.
> Thx
> Tim Calypso#603
>