[C320-list] Ice Box Gasket

[Richard Walker]

Did you cut the corners?


Dick Walker
WindWalker II #687
740 Olive Ave.
Coronado, CA 92118
619.435.8986



-----Original Message-----
From: C320-list <c320-list-bounces at lists.catalina320.com> On Behalf Of Doug Treff
Sent: Thursday, July 8, 2021 11:08 AM
To: c320-list at lists.catalina320.com
Subject: Re: [C320-list] Ice Box Gasket

Rich,

The rubber strip I bought from McMaster came with a peel-off strip and adhesive on it. I thoroughly cleaned the surface of the freezer lip with acetone to make sure it would adhere well. So far, so good.

--
Doug Treff
doug at treff.us

On Thu, Jul 8, 2021, at 12:41 PM, islgirl3 at aol.com wrote:
> Ken,What did you use as an adhesive?
> RichBarbara Rita 897
> 
> 
> -----Original Message-----
> From: Ken McCrimmon <kenmccrimmon at hotmail.com>
> To: C320-List at Catalina320.com <C320-List at Catalina320.com>
> Sent: Wed, Jul 7, 2021 10:39 am
> Subject: Re: [C320-list] Ice Box Gasket
> 
> Thanks for the advice
> ________________________________
> From: C320-list <c320-list-bounces at lists.catalina320.com> on behalf of 
> Doug Treff <doug at treff.us>
> Sent: July 7, 2021 9:57 AM
> To: c320-list at lists.catalina320.com <c320-list at lists.catalina320.com>
> Subject: Re: [C320-list] Ice Box Gasket
> 
> Ken,
> 
> I just did this project and I used the following part. I ordered a 20 foot roll.
> 
> https://www.mcmaster.com/93085K68/
> 
> --
> Doug Treff
> doug at treff.us
> 
> On Tue, Jul 6, 2021, at 7:31 PM, Ken McCrimmon wrote:
> > Hi
> > The gasket that goes between the lids of the fridge/ice box and the 
> > frame needs to be replaced.  It is black hole rubber.
> >
> > Has anybody found a replacement.  I have looked at applicance parts 
> > store, Catalina Direct.
> >
> > Any suggestions welcome
> >
> > Ken
> > Kia Ora
> > Midland, Ont
> >
>