[C320-list] Outhaul

[Gary Magnuson]

Thanks Bill!! We'll done!
Gary
Time A Weigh C320#205


On Wed, Dec 27, 2023, 2:56 PM Bill Culbertson via C320-list <
c320-list at lists.catalina320.com> wrote:

>  Test post for Gary Magnuson - should go to gemanguson at gmail.com instead
> of old frontier email addr.
>  -billHarmony #859
>     On Wednesday, December 27, 2023 at 12:18:44 PM EST, Gary Magnuson via
> C320-list <c320-list at lists.catalina320.com> wrote:
>
>   Hello, How do I get my email address changed?My current email address is
> gemagnuson at gmail.comGary Magnuson
> Time A Weigh #205
>
>     On Sunday, December 24, 2023 at 12:54:47 PM CST, Mark Seyler via
> C320-list <c320-list at lists.catalina320.com> wrote:
>
>  On my No. 232, the wire outhaul is connected to a block inside the boom.
> The rope part of the outhaul runs through that block, and another one fixed
> inside the boom, to provide a multi-part purchase on the outhaul.  (I'm
> pretty sure it's a 3-part purchase, but I'm not at the boat to confirm that
> right now.)  If you wanted to go to all-rope, you'd either need to replace
> the wire strop from the block at the aft end of the boom to the clew of the
> sail, or give up the mechanical advantage from the multi-part purchase.
>
> Mark Seyler
> S/V Reality,
> Catalina 320, #232
> New Orleans, LA
>
>
>
> -----Original Message-----
> From: C320-list <c320-list-bounces at lists.catalina320.com> On Behalf Of
> Dave Hupe via C320-list
> Sent: Sunday, December 24, 2023 9:34 AM
> To: C320-List at Catalina320.com
> Cc: Dave Hupe <hoopdtwo at yahoo.com>
> Subject: Re: [C320-list] Outhaul
>
> Mine is wire to rope too.
> Dave Hupe
> 1994 C320 #32
>
> Sent from Yahoo Mail on Android
>
>   On Sun, Dec 24, 2023 at 9:43 AM, Timothy Osburn via C320-list<
> c320-list at lists.catalina320.com> wrote  The outhaul on my boat ( #401) is
> a wire to rope configuration.  I'm
> thinking of replacing it but I was curious - is the wire to rope is
> standard?  My guess is that it is not but I could not find a reference to
> it in the manual.  In fact, I didn't see it listed under the running
> rigging specs.  Can I replace it with just rope?  Thanks.
> Tim
>
>
>
>
>