[C320-list] PSS question

[Greg Arnold]

I wonder how much air ends up there after the diver cleans the bottom.


On 2/20/2023 6:02 PM, bruceheyman wrote:
> Hi Greg,
> I wanted the vent hose as I always forget to burp it after the diver 
> cleans the bottom.
> Bruce
> Somerset #671 San Pedro, CA
>
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
>
>
> -------- Original message --------
> From: Greg Arnold via C320-list <c320-list at lists.catalina320.com>
> Date: 2/20/23 17:41 (GMT-08:00)
> To: C320-List at Catalina320.com
> Cc: Greg Arnold <greg-arnold at gmx.com>
> Subject: Re: [C320-list] PSS question
>
> PYI sells a plug that replaces the hose barb.  No need to vent on boats
> as slow as ours:
>
> https://store.pyiinc.com/products/pss-hose-barb-plug
>
> Greg
> Santa Barbara, CA
> 2005 C-320 #1054
>
>
>
>
> On 2/20/2023 3:47 PM, Martin Rosenberg via C320-list wrote:
> > The seal requires water in it to keep it cool.
> > The vent hose merely assures that it stays wet and does not air-lock and
> > dry.
> > I tied mine as high as I could and secured it with a tie wrap.
> > It was nice to not need to burp it when I launched the boat.
> > Marty Rosenberg
> >
> > On Mon, Feb 20, 2023 at 5:10 PM Bruce Heyman via C320-list <
> > c320-list at lists.catalina320.com> wrote:
> >
> >> Hi Hugh,
> >> We just made that change last August.   The shipyard went with going
> >> forward and getting it as high as possible in the engine 
> compartment while
> >> staying on the center line of the vessel.   I figured if that point 
> is ever
> >> below the waterline we have serious problems.
> >> Bruce
> >>
> >> Bruce Heyman
> >> Somerset #671   San Pedro (LA) California
> >>
> >> -----Original Message-----
> >> From: C320-list<c320-list-bounces at lists.catalina320.com>  On Behalf Of
> >> Hugh Blackman via C320-list
> >> Sent: Monday, February 20, 2023 1:48 PM
> >> To:C320-List at catalina320.com
> >> Cc: Hugh Blackman<sailvancouver at me.com>
> >> Subject: [C320-list] PSS question
> >>
> >>  Hi group,
> >> Replacing my PSS seal with a vented one. Any thoughts on where to 
> run the
> >> burp hose?
> >> Aft into lazerette locker or forward in engine compartment?
> >> Thanks!
> >> Hugh
> >> Eeyore (formerly Iona)
> >> Cat 320 #641
> >>
> >> Sent from my iPhone
> >>
> >>