[C320-list] Holding Tank Vent

[Mark Calisti]

Yes, that's it, thanks Dave.

________________________________
From: C320-list <c320-list-bounces at lists.catalina320.com> on behalf of Dave Hupe via C320-list <c320-list at lists.catalina320.com>
Sent: Monday, April 15, 2024 8:31 AM
To: C320-List at Catalina320.com <C320-List at Catalina320.com>
Cc: Dave Hupe <hoopdtwo at yahoo.com>
Subject: Re: [C320-list] Holding Tank Vent

This is the standard holding tank vent.  It is all nylon https://www.catalinadirect.com/shop-by-boat/catalina-42/interior/plumbing/tank-vent-fitting-c-320-c-28-c-42-holding-tank/
See the pictures .... is this the vent you are talking about?
I have clipped and lost the outer screw-on cap several times brushing against piers in my slip.
Dave Hupe
C320 #32
Yahoo Mail: Search, Organize, Conquer

  On Sun, Apr 14, 2024 at 10:19 PM, Mark Calisti via C320-list<c320-list at lists.catalina320.com> wrote:   I was doing some pre-launch checks and noticed half of the plastic covering on the holding tank vent (I think it is the holding tank vent) on the exterior starboard side of the hull was no longer adhering to the metal vent. I figure I can glue it back and the lower portion of the vent will still be exposed. The covering goes around the vent about 270 degrees. The other half is still adhering to the other side. What is odd is that there is no vent at all that I could see similar to the vent further back on the starboard side by the transom. I figure it would be on the exposed area. Any ideas?

Mark Calisti
Wayward 749
Solomons, MD