[C320-list] Holding tank replacement

[Greg Flanagan]

Hi Dan, which tank (number) did you buy?

Thanks,

Greg

> On Mar 19, 2024, at 6:53 PM, Dan Winsor via C320-list <c320-list at lists.catalina320.com> wrote:
> 
> I may be missing something but in hull 109 the reason to swap black tanks
> was to double the capacity, from about 10 to about 20 gallons. I went with
> Ronco which was a translucent poly that provides visible level. More detail
> available if desired.
> Dan Winsor
> Lucky Devil
> #109
> 
> On Tue, Mar 19, 2024, 19:15 Mark Seyler via C320-list <
> c320-list at lists.catalina320.com> wrote:
> 
> > If your holding tank is leaking, has damage that suggests a leak is likely,
> > or has become so permeated that it smells, then a replacement might make
> > sense. (One way to check permeation of a hose or tank is to rub the
> > outside
> > with a damp cloth or paper towel, and see if smell transfers to the paper
> > towel.) But unless one of those problems exists, I would think you'd get
> > more benefit from spending your money on a tank monitoring system that
> > would
> > give you a reading on tank level without having to look under the settee.
> > Some systems allow multiple tank sensors to be displayed on a single
> > read-out, which would let you monitor fore and aft water tank levels, as
> > well.
> >
> > If you do need a tank, I'd consider contacting Ronco plastics. I bought a
> > replacement for my aft water tank from them, and even after shipping it was
> > still less than the price quoted before shipping on Catalina Direct's
> > website.
> >
> > Mark Seyler
> > S/V Reality,
> > Catalina 320, #232
> > New Orleans, LA
> >
> > Regards,
> >
> >
> > -----Original Message-----
> > From: C320-list <c320-list-bounces at lists.catalina320.com> On Behalf Of
> > Jack
> > Brennan via C320-list
> > Sent: Tuesday, March 19, 2024 5:49 PM
> > To: C320-List at Catalina320.com
> > Cc: Jack Brennan <jackbrennan333 at outlook.com>
> > Subject: Re: [C320-list] Holding tank replacement
> >
> > Hi Greg:
> >
> > I bought a poly tank from Defender years ago for another sailboat. I was
> > satisfied with it and with the price. And yes, you could see how much
> > diesel
> > was in there.
> >
> > As I remember, the manufacturer had a wide variety of shapes and sizes, so
> > there should be something that fits.
> >
> > I also remember that the manufacturer cautioned against strapping it really
> > tight when first installed. Apparently, poly tanks swell a little when they
> > are first filled.
> >
> > Jack Brennan
> > Sonas, 1998 Catalina 320
> > Tierra Verde, Fl.
> >
> >
> >
> > Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
> >
> > ________________________________
> > From: C320-list <c320-list-bounces at lists.catalina320.com> on behalf of
> > Greg
> > Flanagan via C320-list <c320-list at lists.catalina320.com>
> > Sent: Tuesday, March 19, 2024 6:34:13 PM
> > To: c320-list at lists.catalina320.com <c320-list at lists.catalina320.com>
> > Cc: Greg Flanagan <greg.flanagan at shaw.ca>
> > Subject: [C320-list] Holding tank replacement
> >
> > I have the holding tank out for fibreglass repairs. I could replace the
> > tank
> > if that is what the group thinks is a worthwhile change. I don't like that
> > I
> > can't see into it as it is black. Would a new one be clear? Any other
> > reasons to replace it? I couldn't find much discussion on the members'
> > website.
> >
> > Thanks,
> >
> > Greg Flanagan
> > Hoop Dancer #1076
> > Sidney, BC
> >
> >