[C320-list] Perkins m30 raw water pump
Jeff Smith
svsailmates512 at gmail.com
Sat Oct 5 06:15:39 PDT 2024
Larry,
I used a bearing press kit for front wheel drive vehicles, if I recall correctly. That, or I used a socket that matches the outside of the bearings and a hammer (I also did my wheel bearings on my Ridgeline at the same time, so I may be conflating the two when I say I used the front wheel bearing press kit). I used a micrometer to measure the distance. I had a small amount of water in the engine bilge and a patina on the water pump. I bought the rebuild kit from Parts4Engines.
Jeff
> On Oct 5, 2024, at 9:01 AM, WindSwept via C320-list <c320-list at lists.catalina320.com> wrote:
>
> Jeff - how did you press the bearings?
>
> Larry
> 1995 #246
>
>> On Oct 4, 2024, at 8:49 PM, Jeff Smith via C320-list <c320-list at lists.catalina320.com> wrote:
>>
>> I rebuilt my pump several years ago, and it works fine. Pressing the
>> bearings can be tricky, though. It is a much cheaper repair.
>>
>> Good luck,
>> Jeff
>> ‘94, #121
>>
>>> On Fri, Oct 4, 2024 at 9:02 PM Dave Hupe via C320-list <
>>> c320-list at lists.catalina320.com> wrote:
>>>
>>> I bought a rebuild kit like this
>>> https://www.dieselpartsdirect.com/je294501201mnk, and my pump is working
>>> pretty well now.
>>> David Dines
>>> “Teal Heron”94 C320 #144Beverly, MA
>>> Yahoo Mail: Search, Organize, Conquer
>>>
>>> On Fri, Oct 4, 2024 at 6:18 PM, Gregg Baklund via C320-list<
>>> c320-list at lists.catalina320.com> wrote: I need to replace my raw water
>>> pump on my ‘95 Perkins M30
>>> I have a Jabsco 29450-1201 pump. It looks like these are hard to come by.
>>> Any leads on where to purchase in the states?
>>> Thanks
>>>
>>> Hull 228
>>> SV Paradise
>>> Seattle
>>> Gregg Baklund
>>> 206 402-8896
>>> Sent from my iPhone
>>>
>
More information about the C320-list
mailing list