[C320-list] Cutlass bearing and...
Dave Anderer
danderer at udel.edu
Fri Dec 16 16:24:34 PST 2005
Dave Anderer wrote:
> Jeff Church wrote:
>> Dave, how many hours are on your engine? I have #545 with 425 hours
>> and there is less than a 32nd of an inch of play in the bearing. I
>> don't anticipate that it will need to be replaced for several more
>> years.
> I've got about 375 hours on the engine. As I recall from the survey
> there was about 1/8" of play. I'll check it again and measure more
> carefully if the temps warm up a few degrees - the other day the shaft
> was frozen (!) in the bearing.
Since it warmed up today, I took the time to go look at things. While
it feels like there is a lot of play in the bearing, in fact it is only
about 1/16 of an inch. From what I understand that is acceptable if not
ideal.
More information about the C320-list
mailing list