[C320-list] Was leaving list, now zinc question for Orlando
jonvez at comcast.net
jonvez at comcast.net
Thu Dec 14 10:02:48 PST 2006
Orlando,
You say you used a zinc on the strut of CL2? Just curious as to why since it would be an isolated piece of metal? You have me concerned now since I have never protected the struts on either my 30 or 320....
As for the other questions, our marina has no problem with divers and I have the diver check and clean the bottom in the middle of the summer. Never have had an issue with my shaft zinc--it's the prop zinc that I need to watch.
I used 2 zincs for years, but my diver convinced me to try just one this season and after about 7 months in the water, it proved to be just right--just about half gone. I use Godfrey zincs which seem to work much better than the Canada zincs you find in West.....
Regards,
Jon Vez
-------------- Original message --------------
From: Orlando.Duran at AveryDennison.com
> John,
>
> My dive service routinely replaces zincs as they are wearing out...here in So
> Cal that would be every 4-5 months...on the 320 they would replace the shaft and
> strut zincs and on the 440, I purchased 6 zincs from Flex-O-Fold that go on the
> end of the prop that I will give to the diver so that it will be installed as
> needed...
>
> Any reputable dive service should include zincs as part of their overall
> maintenance service for you...
>
> Have a great time on the 36! Is delivery eminent?
> ----------------------------------
> Regards,
> OD
>
> Sent from my BlackBerry Wireless Handheld
>
>
> ----- Original Message -----
> From: John Van Vessem [jvanvessem at sbcglobal.net]
> Sent: 12/10/2006 07:58 AM
> To: C320-List
> Subject: [C320-list] Leaving the 320 list
>
> To all my friends on the 320 list I just want to say what an educational
> pleasure it has been to read these conversations, I am moving to a 36 and hope
> to join their list if they have one. I'm going to miss my 320 it has been an
> incredible boat and the whole reason I'm sticking with Catalina.
>
> Before I leave I need to tell you about a recent experience. My 320 was
> surveyed for the new owner and when we hauled it out of the water we found that
> the bronze shaft had corroded down by about 1/8 inch in diameter, the zinc was
> missing and was only 10 months old. Bottom line I had to spring for a new
> shaft, stainless this time. Replacing the zincs has not been in my standard
> maintenance routine. But after talking to the 320 dealer he suggested that the
> zincs be replaced every couple of months. I'd like to hear what other people
> have experienced who keep their boat in the water all year.
>
> John Van Vessem
> Sojourn 645
> Vallejo Yacht Club
>
>
> --------------------------------
> The information transmitted is intended only for the person or entity
> to which it is addressed and may contain confidential and/or
> privileged material. Any review, retransmission, dissemination or
> other use of, or taking of any action in reliance upon, this
> information by persons or entities other than the intended recipient
> is prohibited. If you received this in error, please contact the
> sender and delete the material from any computer.
>
>
>
More information about the C320-list
mailing list