[C320-list] PSS Shaft Seal

[Jeff Church]

Russ,

FYI

My most recent contacts with PSS give a little different story than previous 
discussions. In the past they told me to just run the hose up a bulkhead 
somewhere and fasten it securely above the waterline. A couple weeks ago at 
Strictly Sail they told me to definitely plumb the hose to a pressure water 
source. Yesterday on the phone they told me to do which ever is most 
convenient. Now that I've got that settled (not).....I'm looking for what 
Catalina uses for a water source.

JeffC



----- Original Message ----- 
From: "Russell Monaco" <russgm at yahoo.com>
To: "C320-List" <C320-List at catalina320.com>
Sent: Wednesday, February 15, 2006 10:17 PM
Subject: Re: [C320-list] PSS Shaft Seal


> me too!
> russ monaco
>
> Jeff Church <jjemail at comcast.net> wrote:I just ordered a vented graphite 
> collar to replace the original unvented collar on my PSS seal. I'd like to 
> know where Catalina attaches the vent line on newer boats that had the 
> seal installed as original equipment. If someone can email a photo I'd 
> very much appreciate the assistance.
>
> Thanks
>
> JeffC
> !!- _______________________________________
> !!- C320-List at catalina320.com mailing list
> !!- Archives Here: http://www.catalina320.com/list/archives
> !!- Change Subscription Here: http://www.catalina320.com/list/change
> !!- Subscribe Here: http://www.catalina320.com/list/join
>
>
>
> ---------------------------------
>
> What are the most popular cars? Find out at Yahoo! Autos
> !!- _______________________________________
> !!- C320-List at catalina320.com mailing list
> !!- Archives Here: http://www.catalina320.com/list/archives
> !!- Change Subscription Here: http://www.catalina320.com/list/change
> !!- Subscribe Here: http://www.catalina320.com/list/join