[C320-list] adding gxm 30 antenna
Sandy Olson
jams9191 at comcast.net
Tue Feb 28 15:49:28 PST 2006
Thanks and please let me know what you find...happy partying!!
----- Original Message -----
From: "Sweetwater Yacht Charters" <sail at sweetwater-charters.net>
To: "C320-List" <C320-List at catalina320.com>
Sent: Tuesday, February 28, 2006 11:28 AM
Subject: Re: [C320-list] adding gxm 30 antenna
> Sandy-
> I just purchased one of those as well, so I will be mounting it this
spring.
> The previous owner already had an atenna mounted on the port stern rail
(for
> the mostly useless GPS that I am replacing) so I am hoping to use the
> existing wires as guides to pull the new ones through. I am not sure how
it
> is set up, but we are having our "winter blues party" at the marina this
> Saturday and I will take a look at the setup on Persistence.
>
> -Joan
> C32- #90 Persistence
>
> ----- Original Message -----
> From: "Sandy Olson" <Jams9191 at comcast.net>
> To: "'C320-List'" <C320-List at catalina320.com>
> Sent: Saturday, February 25, 2006 12:40 PM
> Subject: Re: [C320-list] adding gxm 30 antenna
>
>
>> Hi all,
>>
>> Anyone have suggestions on where/how to mount this new antenna which
>> gives access to xm radio and weather? I am thinking stern on portside
>> but unsure how to run the wire from there to the pedestal where the GPS
>> unit will be mounted. Do I need to drill into the boat (if so what
>> supplies would I need) and how do I get the wire into the pedestal?
>>
>> Sandy #466
>>
>> -----Original Message-----
>> From: C320-List-bounces at catalina320.com
>> [mailto:C320-List-bounces at catalina320.com] On Behalf Of John Van Vessem
>> Sent: Friday, February 24, 2006 10:52 PM
>> To: C320-List
>> Subject: Re: [C320-list] Pushpit mounting
>>
>> What the heck is a pushpit???
>>
>> John(Sojourn645)
>>
>> Dave Anderer <danderer at udel.edu> wrote:
>> Does anyone know off-hand how the pushpits are mounted to the boat?
>>
>> I want to pull one off to mount a GPS antenna and run the wires
>> internally. There are just 7 screws, but what do they go into? If into
>> tapped plates glassed to the hull - great! If into individual nuts,
>> which then fall off and get lost between the hull and the liner - not
>> great.
>>
>> Thanks.
>>
>> Dave #642
>>
>> [By the bye, I finally have the new SS shaft installed. Solution was
>> finally to just let the yard do it. Took them about 4 hours to lift the
>> boat, drop the rudder, and install the shaft.]
>>
>> !!- _______________________________________
>> !!- C320-List at catalina320.com mailing list
>> !!- Archives Here: http://www.catalina320.com/list/archives
>> !!- Change Subscription Here: http://www.catalina320.com/list/change
>> !!- Subscribe Here: http://www.catalina320.com/list/join
>>
>>
>>
>>
>> John Van Vessem
>> Sojourn 645
>> Vallejo Yacht Club
>> !!- _______________________________________
>> !!- C320-List at catalina320.com mailing list
>> !!- Archives Here: http://www.catalina320.com/list/archives
>> !!- Change Subscription Here: http://www.catalina320.com/list/change
>> !!- Subscribe Here: http://www.catalina320.com/list/join
>>
>>
>>
>> !!- _______________________________________
>> !!- C320-List at catalina320.com mailing list
>> !!- Archives Here: http://www.catalina320.com/list/archives
>> !!- Change Subscription Here: http://www.catalina320.com/list/change
>> !!- Subscribe Here: http://www.catalina320.com/list/join
>>
>
>
> !!- _______________________________________
> !!- C320-List at catalina320.com mailing list
> !!- Archives Here: http://www.catalina320.com/list/archives
> !!- Change Subscription Here: http://www.catalina320.com/list/change
> !!- Subscribe Here: http://www.catalina320.com/list/join
>
More information about the C320-list
mailing list