[C320-list] Autohelm Rudder Reference Transducer

[Jeff Church]

Thanks Walter. I'll probably try that, but there is a heavy plug of silicone 
that fills the last couple of inches of the bottom of the post. I think my 
best bet will be to push the cable through the silicone and up to the pod. 
I'm sure it will be a bit of a hassle, but this whole project looks to be a 
pain. Fabricating a mount for the transducer and squeezing into the aft laz 
to drill holes and install it will be another challenge. It might help if I 
loose 20 Lbs before I get started. I'll probably loose another 20 in the 
process.

JeffC



----- Original Message ----- 
From: "Walter burnett" <selkie2003 at yahoo.com>
To: "C320-List" <C320-List at catalina320.com>
Sent: Friday, January 13, 2006 7:15 PM
Subject: Re: [C320-list] Autohelm Rudder Reference Transducer


> Another trick that makes runnig the cable a little easier is feed an 
> electrical snake through the pedestal to pull the cable back through. A 
> liberal dose of a lubricant (McLube) on the cable aslo helps.
>
>  Walter
>  Selkie #887