[C320-list] Genoa turning blocks

[Larry Barr]

I ordered them at Sail Chicago. There are no part numbers on them. However
They knew exactly what I needed to replace the Lewmar block on my 2002 C320.
Cost was $50.00 each. I am sure that if you give them a call they will know
what you need.

Larry
Great Scot #924

-----Original Message-----
From: C320-List-bounces at catalina320.com
[mailto:C320-List-bounces at catalina320.com]On Behalf Of Dave Anderer
Sent: Wednesday, March 01, 2006 4:56 PM
To: C320-List
Subject: Re: [C320-list] Genoa turning blocks


Which model of the Garhauer blocks are the matching replacement?  Thanks.

Larry Barr wrote:
> I am planning on replacing the turning blocks on my 2002 C320 from the
> Lewmar to Gauhauer that have bearing. I looked today and found no access
to
> the under side of the blocks where they are installed. My question is, are
> the OEM blocks bolted on or tapped into a deck plate glassed into the
deck.
> The blocks that I have to replace the current ones habe the same bolt
> pattern.
>
> Larry
> Great Scot #924
>
>
> !!- _______________________________________
> !!- C320-List at catalina320.com mailing list
> !!- Archives Here: http://www.catalina320.com/list/archives
> !!- Change Subscription Here: http://www.catalina320.com/list/change
> !!- Subscribe Here: http://www.catalina320.com/list/join
>
>

!!- _______________________________________
!!- C320-List at catalina320.com mailing list
!!- Archives Here: http://www.catalina320.com/list/archives
!!- Change Subscription Here: http://www.catalina320.com/list/change
!!- Subscribe Here: http://www.catalina320.com/list/join