[C320-list] Autohelm Mk2 Wheeldrive

[George Hunt]

I recently made this switch.  Although I had a professional actually do 
the job, I did observe and assist.  The solution to the problem merely 
involves rotating the apparent position of the wheel so that the motor 
is on the opposite side.  Then no adjustment of the engine pod was required.
George Hunt
Reprise  C320 #215
Cape Coral, FL

WindSwept wrote:

>Bummer.
>
>I have the parts in hand to make the same replacement.  Like you I was 
>looking for a relatively easy time of it.  Never seems to work out that way.
>
>Where does the interference occur.  The motor or the ring?
>
>Larry
>WindSwept C320#246
>----- Original Message ----- 
>From: "Jeff Church" <jjemail at comcast.net>
>To: "C320" <C320-List at catalina320.com>
>Sent: Wednesday, March 22, 2006 5:31 PM
>Subject: [C320-list] Autohelm Mk2 Wheeldrive
>
>
>  
>
>>I'm trying to replace my older autohelm with a new unit. I thought this 
>>would be a relatively simple project, but it looks like it is going to be 
>>a real pain. The newer (gray) wheeldrive has a larger diameter than the 
>>old one and it hits the engine instrument pod when it is centered on the 
>>wheel (1998 hull #545). If anyone has installed a new wheeldrive on a 320 
>>with the older instrument pod, I'd like to know how it is done. It looks 
>>like there is no choice but to remove the pod a relocate it several inches 
>>lower on the binnacle post.
>>
>>Thanks
>>
>>JeffC
>>!!- _______________________________________
>>!!- C320-List at catalina320.com mailing list
>>!!- Archives Here: http://www.catalina320.com/list/archives
>>!!- Change Subscription Here: http://www.catalina320.com/list/change
>>!!- Subscribe Here: http://www.catalina320.com/list/join
>>
>>    
>>
>
>
>
>!!- _______________________________________
>!!- C320-List at catalina320.com mailing list
>!!- Archives Here: http://www.catalina320.com/list/archives
>!!- Change Subscription Here: http://www.catalina320.com/list/change
>!!- Subscribe Here: http://www.catalina320.com/list/join
>
>
>  
>