[C320-list] Davits

[Richard A. Walker]

For Mike

Thanks...............

Cheers,
 
Dick Walker
740 Olive Ave.
Coronado, CA 92118-2136
619.435.8986
-----Original Message-----
From: C320-List-bounces at catalina320.com
[mailto:C320-List-bounces at catalina320.com] On Behalf Of CMKIT1 at cs.com
Sent: Monday, May 01, 2006 2:23 PM
To: C320-List
Subject: Re: [C320-list] Davits

Dick
We installed this. It comes with  backing plates. It took two of us about
two hours to install and I am very happy with it. I don't know how you could
fix it to be easily removed but it isn't in our way. I plan to take some
photos and post. I will send you a direct copy. The top rod on my boat was
exactly 6' but it is easy to cut if needed.
"Richard A. Walker" <dickwalker at att.net> wrote:

>We are considering installing davits for our 9' dingy.  
>
>Has anyone used the Garhauer product.  It is new and is $600.00  I figure
my
>dink and 4hp engine with fuel does not weigh more than 10-200 lbs. They
make
>great products so this might be good.
>
>Questions:
>
>1.  Do we need a plate under the stern to hold it, a backing plate?
>2.  I want to be able to easily remove it when we don't need it for bay
>sailing.
>3.  If some one has the Garhauer davit can you email me a picture how it
>was installed.
>4.  Any other free advice.
>
>Cheers,
> 
>Dick Walker
>C-320 (687) WindWalker II
>740 Olive Ave.
>Coronado, CA 92118-2136
>619.435.8986
>
>!!- _______________________________________
>!!- C320-List at catalina320.com mailing list
>!!- Archives Here: http://www.catalina320.com/list/archives
>!!- Change Subscription Here: http://www.catalina320.com/list/change
>!!- Subscribe Here: http://www.catalina320.com/list/join
>

!!- _______________________________________
!!- C320-List at catalina320.com mailing list
!!- Archives Here: http://www.catalina320.com/list/archives
!!- Change Subscription Here: http://www.catalina320.com/list/change
!!- Subscribe Here: http://www.catalina320.com/list/join