[C320-list] Lack of Section with Head Pump

[alahlm at comcast.net]

Annie
 The o-ring on the plunger may have slipped off or be broken you can a standard o-ring at any hardware store   to remove the plunger there are four screws that hold the assembly in place
 Al Ahlman
    #476

-------------- Original message -------------- 
From: "Annie Bennett" <annie at sydneyprivatesailing.com.au> 

> Usually the problem with the head seems to be it becoming too stiff to pump. 
> My toilet (only one year old as I replaced it with a new Jabsco last year) 
> has recently started to not be stiff enough. Sometimes it works fine - but 
> seems to slip slightly. At other times if you pump the handle briskly up 
> and down you suddenly get suction but at other times you pump the handle up 
> and down, fast or slow, but with no suction - and no water flow. Any ideas? 
> I'm getting worried how I'm going to clean out the contents of the bowl if 
> it won't pump. 
> 
> Annie Bennett #812 
> 
> 
> 
> 
> !!- _______________________________________ 
> !!- C320-List at catalina320.com mailing list 
> !!- Archives Here: http://www.catalina320.com/list/archives 
> !!- Change Subscription Here: http://www.catalina320.com/list/change 
> !!- Subscribe Here: http://www.catalina320.com/list/join