[C320-list] Jib Sheets Jamming

[Richard A. Walker]

Thanks Scott and all the other replies.  I will try the washers.

Cheers,
 
Dick Walker
C-320 (687) WindWalker II
740 Olive Ave.
Coronado, CA 92118-2136
619.435.8986
-----Original Message-----
From: C320-List-bounces at catalina320.com
[mailto:C320-List-bounces at catalina320.com] On Behalf Of Scott Thompson
Sent: Wednesday, May 10, 2006 2:50 PM
To: C320-List
Subject: Re: [C320-list] Jib Sheets Jamming

I haven't made the change, but have the problem.  See the picture in my 
album on the web site.  The ideal solution is to have a toggle that 
actually fits the chain plate, with a much shorter clevis pin to match. 
  You can try to convert the toggle by squeezing it with a vice, but I'm 
not sure what the engineers would say about that solution.  Brion Toss's 
rigging book is pretty clear that you don't want toggles that are too 
wide because they lead to substantial unsupported bending loads on the 
clevis pin.

Richard A. Walker wrote:
> I have from time to time a problem with my jib sheets jamming under the
> shroud turn buckles on the deck.  What seems to be the obvious solution is
> to put 1" vice the 2"  clevis pins.  
> 
> Has anyone made this change?
> 
> Cheers,
>  
> Dick Walker
> C-320 (687) WindWalker II
> 740 Olive Ave.
> Coronado, CA 92118-2136
> 619.435.8986
> 
> !!- _______________________________________
> !!- C320-List at catalina320.com mailing list
> !!- Archives Here: http://www.catalina320.com/list/archives
> !!- Change Subscription Here: http://www.catalina320.com/list/change
> !!- Subscribe Here: http://www.catalina320.com/list/join


!!- _______________________________________
!!- C320-List at catalina320.com mailing list
!!- Archives Here: http://www.catalina320.com/list/archives
!!- Change Subscription Here: http://www.catalina320.com/list/change
!!- Subscribe Here: http://www.catalina320.com/list/join