[C320-list] cutlass bearing

[McCullough, Kirk]

We got over 700 hours on our cutlass bearing, it was a little loose the
past 2 seasons, but it never gave any problems. It's a low cost job so
go ahead and change it.

Kirk L. McCullough
Boomerang #124
 

-----Original Message-----
From: C320-List-bounces at catalina320.com
[mailto:C320-List-bounces at catalina320.com] On Behalf Of Mark Calisti
Sent: Sunday, May 21, 2006 5:47 AM
To: C320-List at catalina320.com
Subject: Re: [C320-list] cutlass bearing

We have a 2000 and changed it this year as we noticed some play in the 
cutlass bearing. If the marina uses the tool, it should take no longer
than 
a couple of hours and the shaft does not need to be removed. I don't
recall 
the price of the part, but I think it was around $50 and then a couple
of 
hours for the labor.

Mark Calisti
Wayward #749

>From: Tim <chillinonahd at yahoo.com>
>Reply-To: C320-List <C320-List at catalina320.com>
>To: C320-List at catalina320.com
>Subject: [C320-list] cutlass  bearing
>Date: Sun, 21 May 2006 05:39:23 -0700 (PDT)
>
>anyone ever have to change a cutlass bearing on a c-320? curious to the

>expense and whether the shaft had to be removed or not. also, this is a
99 
>with about 350 hours is this bearing going prematurely?
>
>---------------------------------
>Feel free to call! Free PC-to-PC calls. Low rates on PC-to-Phone.  Get 
>Yahoo! Messenger with Voice




This electronic message contains information from BTG Americas Inc. which may be confidential, privileged or otherwise protected from disclosure.  The information is intended to be used solely by the recipient(s) named.  If you are not an intended recipient, be aware that any review, disclosure, copying, distributing or use of this transmission or its content is prohibited. If you have received this transmission in error, please delete it and notify us immediately.