[C320-list] Transmission/Teleflex cable woes

[Russell Monaco]

thanks for the compass heads up, BUT, doesn't anyone have any tips on this cable I need to replace? what size? where to get it? anything?
russ
Arthur Gates <argates2nd at earthlink.net> wrote: Russ,
In 1995 #182, the 4 bolts holding the compass base to the aluminum binacle
were a problem.  They had been locktighted on the bottom threads!  
Two came off with a large screw driver plus a large wrench on the square
driver shaft.
The other two required cutting off with a dremel tool once the bolt's
sloted head was stripped.
Edson sent me four 3.5" specially treated replacment bolts for $45 via
overnight del'y which turned out to take 3 days to arrive.  Then it turned
out to take 4" bolts which they didn't have but the local hdwe did in ss,
so I used anti-seeze grease on the threads.  I ret'd the 4 for credit to
Edson, but they would not credit the freight.
I have no input on the cables.
Rollie

> [Original Message]
> From: Russell Monaco 
> To: C320-List 
> Date: 5/29/2006 2:39:57 PM
> Subject: [C320-list]  Transmission/Teleflex cable woes
>
> Hi all-
> I snapped the end of the "teleflex" cable this week(the cable from the
helm to the transmission shift lever on the the transmission), while away
and had to do real Magiver job to get the helm to control the transmission,
but now i need a new cable, does anyone know exactly what type and length
cable I need..later I will send the pix of what I came up with to "deal
with thing" temporarily...also, anyone know what it will entail getting the
compass off, any tips, i know it has been discussed,,,
> russ monaco
>
>   
> ---------------------------------
> Do you Yahoo!?
>  Everyone is raving about the  all-new Yahoo! Mail Beta.





			
---------------------------------
Sneak preview the  all-new Yahoo.com. It's not radically different. Just radically better.