[C320-list] Voltage Gauge for Engine Controls Pod

[McCullough, Kirk]

Thanks for your input. 

Maybe I need to simplify this. The gauge is broken; the bezel has parted
from the gauge case, leaving a gap between the front of the gauge and
the engine pod panel; with the gauge internals open to the elements. The
weeping holes won't save this gauge. It needs to be replaced. 

I have contacted Seward and they have been most helpful.

Kirk L. McCullough
Boomerang #124 
 

-----Original Message-----
From: C320-List-bounces at catalina320.com
[mailto:C320-List-bounces at catalina320.com] On Behalf Of Chris Burti
Sent: Tuesday, May 30, 2006 5:24 AM
To: C320-List
Subject: Re: [C320-list] Voltage Gauge for Engine Controls Pod

I talked with Seaward Tech Service about this issue
just last week. They are not sealed instruments. They
actually vent...save your money, make sure your
instrument pod has weep holes in the bottom to help
dry our. Catalina changed the pod to add the holes
according to Seaward, but I don't know when.

--- "McCullough, Kirk" <kirk.mccullough at btg.com>
wrote:

> Dick thanks: its more a mechanical issue. The gauge
> still works its just
> that the bezel is separating from the gauge body and
> it gets moisture in
> all the time. I want to replace it.
> 
> Kirk L. McCullough
> Analytical Sales Mgr 
>  
> 
> -----Original Message-----
> From: C320-List-bounces at catalina320.com
> [mailto:C320-List-bounces at catalina320.com] On Behalf
> Of Richard A.
> Walker
> Sent: Monday, May 29, 2006 2:08 PM
> To: 'C320-List'
> Subject: Re: [C320-list] Voltage Gauge for Engine
> Controls Pod
> 
> Here it is Kirk.  Have you checked the leads with a
> voltmeter?  It may
> be
> the connection.
> 
> http://www.seawardproducts.com
> 
> Cheers,
>  
> Dick Walker
> C-320 (687) WindWalker II
> 740 Olive Ave.
> Coronado, CA 92118-2136
> 619.435.8986
> 
> 
> -----Original Message-----
> From: C320-List-bounces at catalina320.com
> [mailto:C320-List-bounces at catalina320.com] On Behalf
> Of McCullough, Kirk
> Sent: Monday, May 29, 2006 2:04 PM
> To: C320-List
> Subject: [C320-list] Voltage Gauge for Engine
> Controls Pod
> 
> Does anyone recall off hand the manufacturer of the
> engine controls? I
> need to replace the voltmeter and can't make a trip
> to the boat until
> the weekend. The boat is 1994 with the Perkins
> engine.
> 
>  
> 
> Kirk L. McCullough
> 
> Boomerang #124 
> 
>  
> 
>  
> 
> 
> This electronic message contains information from
> BTG Americas Inc.
> which
> may be confidential, privileged or otherwise
> protected from disclosure.
> The
> information is intended to be used solely by the
> recipient(s) named.  If
> you
> are not an intended recipient, be aware that any
> review, disclosure,
> copying, distributing or use of this transmission or
> its content is
> prohibited. If you have received this transmission
> in error, please
> delete
> it and notify us immediately. 
> 
> 
> 
> 
> 


Chris Burti
"Commitment"
Catalina 320, #867, 
Farmville, NC

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com