[C320-list] Zincs for Autoprops

[Bruce Heyman]

Dick,
Thanks!
Bruce

-----Original Message-----
From: c320-list-bounces at catalina320.com
[mailto:c320-list-bounces at catalina320.com] On Behalf Of Richard A. Walker
Sent: Friday, November 17, 2006 12:28 PM
To: 'C320-List'
Subject: Re: [C320-list] Zincs for Autoprops

You can get them at Sunset Marine


El Cajon: Bob Keplinger, Parts Mgr.     (619) 593-4006
Oceanside: Derrick Pregler, Parts Mgr.    (760) 722-5817    

Shelter Island: Rod Lemley, Parts Mgr. (619) 222-1634

Cheers,
 
Dick Walker
C-320 (687) WindWalker II
740 Olive Ave.
Coronado, CA 92118-2136
619.435.8986

-----Original Message-----
From: c320-list-bounces at catalina320.com
[mailto:c320-list-bounces at catalina320.com] On Behalf Of Stanley Rogacevicz
Sent: Friday, November 17, 2006 11:52 AM
To: 'C320-List'
Subject: Re: [C320-list] Zincs for Autoprops

Bruce,
   Nope. A couple came with the boat so I've been putting off the
pain.
Stan

>>> "Bruce Heyman" <BruceHeyman at cox.net> 11/17/2006 2:29 PM >>>
Stan,
I plan on trying that with the next batch to see if they last longer. 
Did
you find a cheap(er) supply?  I think Dick Walker found a store in SD
that
sells them.
Thanks,
Bruce
Somerset SoCal 671

-----Original Message-----
From: c320-list-bounces at catalina320.com 
[mailto:c320-list-bounces at catalina320.com] On Behalf Of Stanley
Rogacevicz
Sent: Friday, November 17, 2006 5:42 AM
To: 'C320-List'
Subject: Re: [C320-list] Zincs for Autoprops

Bruce,
   One little trick that I have seen in a couple of sail mags in past
couple years is to paint the screw hole area (not the mating surface)
of
the zinc to try to slow down the consumption at those thinnest areas.
I
don't have any good A-B tests but it can't hurt and it's a very cheap
way to try to overcome the poor design.
Stan
formerly "Christy Leigh"
c320 #656
Wickford/Narragansett Bay RI

>>> "Bruce Heyman" <BruceHeyman at cox.net> 11/16/2006 3:12 PM >>>
Clarification.  Not looking for cheep Autoprop...I know there is a
former
Commodore with one for sale at a very good price...I'm looking for the
Zinc...:-) Sorry Russ.
Bruce
-----Original Message-----
From: c320-list-bounces at catalina320.com 
[mailto:c320-list-bounces at catalina320.com] On Behalf Of Bruce Heyman
Sent: Thursday, November 16, 2006 12:10 PM
To: C320-List at catalina320.com 
Subject: [C320-list] Zincs for Autoprops
Has anyone found a good source, other than A-B Marine, for the H5
Autoprop?
If so what are you paying for them?
Also has anyone considered this: http://www.smtinc.net/APApage.htm ? 
Looks
like a really cleaver way to  get around the problem of the edges of
the
zinc's going fast and leaving a poor electrical connection to the
propeller.
I've seen another version that would use a standard oval zinc which I
bet
would be even cheaper ( <$6 bucks per copy).  
Cheep Bruce trying to save for a chart plotter,
Somerset 671 SoCal
Bruce Heyman
949 289-8400