[C320-list] Water lines

[Morey Waltuck]

Dave, thanks.  
That sounds pretty straight forward.
Morey 

----- Original Message ----- 
From: "David J Gleason" <djgleason1 at juno.com>
To: <c320-list at catalina320.com>
Sent: Friday, October 27, 2006 8:56 PM
Subject: Re: [C320-list] Water lines


> Morey:
> 
> To remove the line from a fitting it is very simple:
> 
> 1 - Remove the plastic cap from the end of the fitting where the water
> line enters.  A small flat blade screwdriver works best.
> 
> 2 - Remove the grey plastic C clip that is set into the fitting just
> below where the line enters the fitting.
> 
> 3 - Press down on the ring that the C clip was keeping in an extended
> position.
> 
> 4 - Pull the line out of the fitting.
> 
> To reinstall, reverse the above steps.
> 
> Dave Gleason
> Proud Mary, #150
> 
> On Fri, 27 Oct 2006 20:35:30 -0400 "Morey Waltuck" <mwaltuck at comcast.net>
> writes:
>> Our C320 was built in 1996 and has the Red and Blue piping system.  
>> To 
>> remove a water line from a fitting, do we somehow remove the end of 
>> the 
>> fitting which seems to rotate fairly freely?
>> 
>> Morey Waltuck
>> Getaway #352 
>> 
>> 
>> 
>> 
>> 
>