[C320-list] exhaust mixing elbows

[Chris Holt]

I asked the Yanmar distributor about the parts for a 3GM30F and they said 
there isn't just one choice.  There are options.  When we were looking 
through the parts list we can across at least 3 different exhaust elbows 
that all fit on the 3GM30F.

----- Original Message -----
From: <jonvez at comcast.net>
To: "C320-List" <c320-list at catalina320.com>
Sent: Monday, April 16, 2007 11:10 AM
Subject: Re: [C320-list] exhaust mixing elbows

> The hose clamps are designed specifically for exhaust hoses and have a 
> more substantial screw mechanism as well and the clamp itself is solid--no 
> notches. You can find them at WM. If you don't have luck finding them, let 
> me know and I will find the part number for you--
> As for the 'standard' parts. Ask a Yanmar distributor for the parts for 
> the 3GM30F. I saw the components at Old Port Marine in Newport, RI....
>
> Regards,
>
> Jon
>
> -------------- Original message -------------- 
> From: "Chris Holt" <oldman1030 at hotmail.com>
>
>> I have the same problem with the leaking.
>> I replace the exhaust hose last year thinking it was the problem but it
>> still leaks.
>> What is special about the hose clamps you are referring to?
>>
>> Thanks,
>>
>> Chris
>>
>> ----- Original Message ----- 
>> From:
>> To: "C320-List"
>> Sent: Monday, April 16, 2007 8:31 AM
>> Subject: Re: [C320-list] exhaust mixing elbows
>>
>> > Dave,
>> >
>> > This is the exact setup I have. I notice you also have some leaking 
>> > from
>> > the hose/elbow connection on your transmission housing. I bought some 
>> > hose
>> > clamps that are designed for exhaust hose which eliminated that 
>> > problem.
>> > Unfortunately it still does a number on the edge of the hose. What is 
>> > your
>> > Hull #?. I have #582/99....
>> >
>> > Regards,
>> >
>> > Jon
>> >
>> > -------------- Original message -------------- 
>> > From: Dave Anderer
>> >
>> >> No very good pictures. Here are a couple - the piece is wrapped in
>> >> the silver insulation.
>> >>
>> >> http://udel.edu/~danderer/elbow1.jpg
>> >> http://udel.edu/~danderer/elbow2.jpg
>> >>
>> >>
>> >> On Apr 15, 2007, at 1:38 PM, Bruce Heyman wrote:
>> >>
>> >> > Dave,
>> >> > Do you have any pictures by chance? Also is the custom part
>> >> > attached at all
>> >> > three points with hoses?
>> >> > Thanks,
>> >> > Bruce
>> >> > Somerset #671 SoCal
>> >>
>> >>
>> >
>>
>