[C320-list] Raw Water Intake Thru-Hull

[John Frost]

I have a raised brass "bump" on the surface of my intake with five, 1/4 inch
slots running in the direction of boat travel. I have a picture if anyone
needs it.

John Frost
2007 C320 MKII, Hull # 1118
Lake Guntesville, AL

-----Original Message-----
From: c320-list-bounces at catalina320.com
[mailto:c320-list-bounces at catalina320.com] On Behalf Of
Orlando.Duran at AveryDennison.com
Sent: Monday, December 17, 2007 3:46 PM
To: C320-List
Subject: Re: [C320-list] Raw Water Intake Thru-Hull

As far as I know, no 320 has strainer plate or mesh screen on the outside
of the hull....


                                                                          
             mike hunter                                                  
             <popotladreaming                                             
             @yahoo.com>                                               To 
             Sent by:                 C320-List                           
             c320-list-bounce         <c320-list at catalina320.com>         
             s at catalina320.or                                          cc 
             g                                                            
                                                                  Subject 
                                      [C320-list] Raw Water Intake        
             12/17/2007 01:40         Thru-Hull                           
             PM                                                           
                                                                          
                                                                          
              Please respond                                              
                    to                                                    
                C320-List                                                 
             <c320-list at catal                                             
               ina320.org>                                                
                                                                          
                                                                          




Hello,

Are 320's supposed to have a mesh screen or strainer plate covering the
raw water intake thru-hull hole (attached to the hull)?  Mine does not.  I
had to clean my inline strainer twice while coming into the marina on
Saturday due to chewed up kelp.  I'm usually happy for any reason to stay
out longer, but it's tough to keep smilin' when the engine stops
spittin'...

Thanks!



____________________________________________________________________________
________

Never miss a thing.  Make Yahoo your home page.
http://www.yahoo.com/r/hs



- -----------------------------------------------------------------
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and delete the material from any
computer.