[C320-list] AGM vs Gel vs Wet

[Sandy Olson]

Too cold for skiing this am, so I was looking through my defender catalogue. 
I am looking to replace my OEM wet-cell 4Ds with AGM or Gel.  Any opinions 
on which are better and if there are any that will fit in the existing 
battery box.

Mike Olson
Lindsay Ann #466


----- Original Message ----- 
From: "Adam Weiner" <esquirecatering at rcn.com>
To: "'C320-List'" <c320-list at catalina320.com>
Sent: Thursday, February 01, 2007 11:25 PM
Subject: Re: [C320-list] FW: Needed - tips for replacing head 
andholdingtankhoses


> Tanks a lot.
>
> Adam
>
> -----Original Message-----
> From: c320-list-bounces at catalina320.com
> [mailto:c320-list-bounces at catalina320.com] On Behalf Of WindSwept
> Sent: Thursday, February 01, 2007 7:25 PM
> To: kmielen at iwon.com; C320-List
> Subject: Re: [C320-list] FW: Needed - tips for replacing head and
> holdingtankhoses
>
>
> Cool, I like the search option.
>
>
> ----- Original Message ----- 
> From: "Karl Mielenhausen _/) " <kmielen at iwon.com>
> To: <C320-List at catalina320.com>
> Sent: Thursday, February 01, 2007 11:58 AM
> Subject: [C320-list] FW: Needed - tips for replacing head and holding
> tankhoses
>
>
>>
>> Larry,
>>
>>
>>
>> Here is a link to some of the comments that have been posted here
>> about
>> holding tank hose replacement...
>>
>> http://pages.suddenlink.net/kmielen/C320Docs6.html
>>
>>
>>
>> It is also possible to search the list archives here...
>>
>> http://www.catalina320.com/list/search
>>
>>
>>
>> Good luck with the project.
>>
>>
>>
>> Karl Mielenhausen
>>
>> 2000 C320 Hull#690 "Silver Lining"
>>
>> New Bern, NC
>>
>> http://pages.suddenlink.net/kmielen/
>>
>> From: WindSwept [mailto: c320_windswept at sbcglobal.net]
>>
>> To: C320-List at catalina320.com
>>
>> Date: Thu, 1 Feb 2007 08:33:50 -0600
>>
>> Subject: [C320-list] Needed - tips for replacing head and holding tank
>> hoses
>>
>>
>>
>> I have to do this task soon.  Realizing the potential unpleasant
>> nature of
>> the project, I wanted to find out what others experiences have been.
> I am
>> especially interested in any tips for making the job go smoothly.A
>> specific question I have is how much of the 11/2 inch diameter hose is
>
>> required.  Its difficult to measure in advance since much of it is
> hidden.
>> I don't want to start the job until I am certain I have the supplies
>> necessary for reassembly.  However considering the cost of the hose I
>> don't want to buy a lot more than I need.LarryWindSwept C320 #246
>>
>> _______________________________________________
>>
>>
>>
>>
>
>
>
>