[C320-list] More on Frig
jonvez at comcast.net
jonvez at comcast.net
Mon Jun 4 04:49:19 PDT 2007
Wes,
What size tubs and where did you get them? Sounds like a a good way to gain easier access to the lower portion of the fridge....
Regards,
Jon
-------------- Original message --------------
From: wes.giles at averydennison.com
> Some of us replaced the wire shelves with plastic tubs that fits along the
> ridges on either side. It allowed us to slide the tubs back and forth to
> access the lowest part of the fridge, and allowed more volume than the
> shelve did. We drilled holes in the tubs to for ventilation. Works great.
>
> Wes
>
>
>
> "Robert E. Sloat"
> Sent by: c320-list-bounces at catalina320.com
> 06/01/2007 03:08 PM
> Please respond to
> C320-List
>
>
> To
> "C320-List"
> cc
>
> Subject
> Re: [C320-list] More on Frig
>
>
>
>
>
>
> John-Great and brilliant and so obvious in hindsight. I have a little
> play
> in the ends of the shelves on Hull 894 and will stop by the hardware store
>
> after getting the rod diameters and needed length. Thanks.
>
> Now, how do I get hull speed beating in 4 knots true!
>
> Bob Sloat
> Savannah 894
> ----- Original Message -----
> From:
> To: "C320-List"
> Sent: Friday, June 01, 2007 9:37 AM
> Subject: Re: [C320-list] More on Frig
>
>
> > Herb,
> >
> > Brilliant--no, but I too was so frustrated that I did come up with a
> > solution that has worked great for me.
> >
> > I took a measurement of the diameter of the ends of the tongs of the
> > shelves with the plastic protective caps removed (the part that holds
> the
> > shelves up on the fridge ledge). I went to Home Depot and found some
> very
> > rigid plastic tubing that snugly fit around the shelve ends. I cut a
> piece
> > of tube and pushed them over the ends effectively lenghening the
> > shelves.Works great and there is no loss of support because the gap you
> > are covering is so small and the tubing goes on the shelve end with a
> good
> > amount of overlap. This is a very easy and quick fix. If my explanation
> is
> > confusing, let me know and I will try and clarify or take pics and post
> > them this weekend....
> >
> > Regards,
> >
> > Jon Vez
> >
> > -------------- Original message --------------
> > From: hcreech at comcast.net
> >
> >> I really don't like the way the shelves fit in the frig, if you place
> too
> >> much
> >> weight in them they are always falling. So far I have wire tied the top
>
> >> two
> >> shelves together and added plastic extenders to the posts but they
> still
> >> fall.
> >> Someone on this list must have some brilliant solution. I'll just sit
> >> back and
> >> wait for it to appear.
> >>
> >> Sincerely,
> >> Herb Creech
> >> Cloud Chaser #606
> >>
>
>
>
>
>
> - -----------------------------------------------------------------
> The information transmitted is intended only for the person or entity to which
> it is addressed and may contain confidential and/or privileged material. Any
> review, retransmission, dissemination or other use of, or taking of any action
> in reliance upon, this information by persons or entities other than the
> intended recipient is prohibited. If you received this in error, please contact
> the sender and delete the material from any computer.
More information about the C320-list
mailing list