[C320-list] More on Frig

[wes.giles at averydennison.com]

Jon,

I don't remember the size. just measure the width of the outside wall. You 
should be able to get them at several places that carry containers. 
Container Store would be one.

Wes



jonvez at comcast.net 
Sent by: c320-list-bounces at catalina320.com
06/04/2007 04:49 AM
Please respond to
C320-List <c320-list at catalina320.com>


To
C320-List <c320-list at catalina320.com>
cc

Subject
Re: [C320-list] More on Frig






Wes,

What size tubs and where did you get them? Sounds like a a good way to 
gain easier access to the lower portion of the fridge....

Regards,

Jon

-------------- Original message -------------- 
From: wes.giles at averydennison.com 

> Some of us replaced the wire shelves with plastic tubs that fits along 
the 
> ridges on either side. It allowed us to slide the tubs back and forth to 

> access the lowest part of the fridge, and allowed more volume than the 
> shelve did. We drilled holes in the tubs to for ventilation. Works 
great. 
> 
> Wes 
> 
> 
> 
> "Robert E. Sloat" 
> Sent by: c320-list-bounces at catalina320.com 
> 06/01/2007 03:08 PM 
> Please respond to 
> C320-List 
> 
> 
> To 
> "C320-List" 
> cc 
> 
> Subject 
> Re: [C320-list] More on Frig 
> 
> 
> 
> 
> 
> 
> John-Great and brilliant and so obvious in hindsight. I have a little 
> play 
> in the ends of the shelves on Hull 894 and will stop by the hardware 
store 
> 
> after getting the rod diameters and needed length. Thanks. 
> 
> Now, how do I get hull speed beating in 4 knots true! 
> 
> Bob Sloat 
> Savannah 894 
> ----- Original Message ----- 
> From: 
> To: "C320-List" 
> Sent: Friday, June 01, 2007 9:37 AM 
> Subject: Re: [C320-list] More on Frig 
> 
> 
> > Herb, 
> > 
> > Brilliant--no, but I too was so frustrated that I did come up with a 
> > solution that has worked great for me. 
> > 
> > I took a measurement of the diameter of the ends of the tongs of the 
> > shelves with the plastic protective caps removed (the part that holds 
> the 
> > shelves up on the fridge ledge). I went to Home Depot and found some 
> very 
> > rigid plastic tubing that snugly fit around the shelve ends. I cut a 
> piece 
> > of tube and pushed them over the ends effectively lenghening the 
> > shelves.Works great and there is no loss of support because the gap 
you 
> > are covering is so small and the tubing goes on the shelve end with a 
> good 
> > amount of overlap. This is a very easy and quick fix. If my 
explanation 
> is 
> > confusing, let me know and I will try and clarify or take pics and 
post 
> > them this weekend.... 
> > 
> > Regards, 
> > 
> > Jon Vez 
> > 
> > -------------- Original message -------------- 
> > From: hcreech at comcast.net 
> > 
> >> I really don't like the way the shelves fit in the frig, if you place 

> too 
> >> much 
> >> weight in them they are always falling. So far I have wire tied the 
top 
> 
> >> two 
> >> shelves together and added plastic extenders to the posts but they 
> still 
> >> fall. 
> >> Someone on this list must have some brilliant solution. I'll just sit 

> >> back and 
> >> wait for it to appear. 
> >> 
> >> Sincerely, 
> >> Herb Creech 
> >> Cloud Chaser #606 
> >> 
> 
> 
> 
> 
> 
> - ----------------------------------------------------------------- 
> The information transmitted is intended only for the person or entity to 
which 
> it is addressed and may contain confidential and/or privileged material. 
Any 
> review, retransmission, dissemination or other use of, or taking of any 
action 
> in reliance upon, this information by persons or entities other than the 

> intended recipient is prohibited. If you received this in error, please 
contact 
> the sender and delete the material from any computer. 



- -----------------------------------------------------------------
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.