[C320-list] Politics, Religion and Anchors

Rod Boer rod.boer1 at verizon.net
Mon Jun 4 13:36:30 PDT 2007


Hi Jon,

I have the FX 16 as a backup anchor which is stored in the anchor locker.  I 
added a couple of pieces of tubing to extend the bar on the anchor which 
enabled it to hang in the pre-molded in slots.  Joe's C320 is in the same 
series as mine at #688.  Hope this helps.

Rod
----- Original Message ----- 
From: <jonvez at comcast.net>
To: <joe at dolphinmortgage.com>; "C320-List" <c320-list at catalina320.com>
Sent: Monday, June 04, 2007 2:13 PM
Subject: Re: [C320-list] Politics, Religion and Anchors


> Thanks Joe. I have the FX-11 as my back up anchor and really like it. 
> Perhaps I'll just upgrade this one to an FX-16 and be done with it. Two 
> questions--Does it fit in the built in moldings in the anchor locker and 
> how much chain do you use? Thanks...
>
> Regards,
>
> Jon
>
> -------------- Original message -------------- 
> From: "Joe Barrett" <joe at dolphinmortgage.com>
>
>>
>> Hi Jon, absolutely love my Fortress FX-16. Light weight, great holding. 
>> Very
>> comfortable sleeping at night knowing it's down there.
>> Joe Barrett
>>
>> -----Original Message----- 
>> From: c320-list-bounces at catalina320.com
>> [mailto:c320-list-bounces at catalina320.com] On Behalf Of 
>> jonvez at comcast.net
>> Sent: Monday, June 04, 2007 8:13 AM
>> To: 320 List
>> Subject: [C320-list] Politics, Religion and Anchors
>>
>> I've had upgrading my ground tackle on the list for a while and this year 
>> we
>> are hoping to visit some more out of the way anchorages in Maine. 
>> Although
>> I've been happy with my 22# Bruce, I feel it is at the outer edge of 
>> being
>> appropriately sized for our 320. So I'm looking for some feedback on 
>> what's
>> worked for you in terms of ease of stowage, holding (primarily in mud) 
>> and
>> size. All things being equal, I will probably just upgrade to a 33# and 
>> get
>> a lot more chain--I know this has been discussed before (including a 
>> video),
>> but thought I'd throw this out there.....Thanks in advance....
>>
>> Regards,
>>
>> Jon
>>
>> 





More information about the C320-list mailing list