[C320-list] Garhauer Davits

[Richard A. Walker]

Just tell Mark the size.  One week.

Call me if you want the tips; measure first then drill. Fill the holes also
with 3m 5400 or other sealant.

WE love our.

Cheers,
 
Dick Walker
C-320 (687) WindWalker II
740 Olive Ave.
Coronado, CA 92118-2136
619.435.8986


-----Original Message-----
From: c320-list-bounces at catalina320.com
[mailto:c320-list-bounces at catalina320.com] On Behalf Of Lamar Desmond
Sent: Monday, June 04, 2007 7:42 PM
To: 'C320-List'
Subject: [C320-list] Garhauer Davits

Anyone with Garhauer Davits: how long did you have them make the connector
piece; I thought they were a standard size and I would have to cut it but
they said they make it custom. 

I was looking at the two sets of pictures on our site and like the looks of
the Garhauer's but am not sure if I would mount them on the lower or upper
rail.  We have the more mature 320 w/o the transom step so I'd be mounting
to the transom in either case.

Any installation hints or tips; looks pretty straight forward: 8 holes and a
couple of clamps.

Thanks in advance,
Lamar Desmond
Blue Moon #358