[C320-list] Garhauer Davits

[Pat Moriarty]

Did you get the pics. I only spend 1 hour a week on the home computer 
and 40+ on the office so I can do it from here better than home.

At 06:34 PM 6/5/2007, you wrote:
>Yes it was the cross bar and pictures would be helpful.  I was thinking of
>not mounting them parallel but with the upper's a little closer together
>then the bottom thinking it would add some stability side to side?  Not sure
>that would be an issue our dink is less then 80lbs and the 3.5hp 4-stroke
>just under 40lbs.
>
>Thanks,
>Lamar
>
>
>
>-----Original Message-----
>From: c320-list-bounces at catalina320.com
>[mailto:c320-list-bounces at catalina320.com] On Behalf Of Pat Moriarty
>Sent: Tuesday, June 05, 2007 8:06 AM
>To: C320-List
>Subject: Re: [C320-list] Garhauer Davits
>
>Are you talking the cross bar? I got the 7' and cut it after I mounted the
>arms. I also used the lower rail since I have the motor on the boat all the
>time and have not noticed any flex problems and at a rail down heel the prop
>does not hit the water. I will take some pics this weekend if you like.
>
>Pat #130
>
>At 09:42 PM 6/4/2007, you wrote:
> >Anyone with Garhauer Davits: how long did you have them make the
> >connector piece; I thought they were a standard size and I would have
> >to cut it but they said they make it custom.
> >
> >I was looking at the two sets of pictures on our site and like the
> >looks of the Garhauer's but am not sure if I would mount them on the
> >lower or upper rail.  We have the more mature 320 w/o the transom step
> >so I'd be mounting to the transom in either case.
> >
> >Any installation hints or tips; looks pretty straight forward: 8 holes
> >and a couple of clamps.
> >
> >Thanks in advance,
> >Lamar Desmond
> >Blue Moon #358
>
>Pat Moriarty
>PSI Urethanes Inc
>PH: 800-888-5156  Fax: 512-837-8733
>Please visit our web site at
>www.psiurethanes.com

Pat Moriarty
PSI Urethanes Inc
PH: 800-888-5156  Fax: 512-837-8733
Please visit our web site at
www.psiurethanes.com