[C320-list] Garhauer Davits

[Lamar Desmond]

Yes it was the cross bar and pictures would be helpful.  I was thinking of
not mounting them parallel but with the upper's a little closer together
then the bottom thinking it would add some stability side to side?  Not sure
that would be an issue our dink is less then 80lbs and the 3.5hp 4-stroke
just under 40lbs.

Thanks,
Lamar



-----Original Message-----
From: c320-list-bounces at catalina320.com
[mailto:c320-list-bounces at catalina320.com] On Behalf Of Pat Moriarty
Sent: Tuesday, June 05, 2007 8:06 AM
To: C320-List
Subject: Re: [C320-list] Garhauer Davits

Are you talking the cross bar? I got the 7' and cut it after I mounted the
arms. I also used the lower rail since I have the motor on the boat all the
time and have not noticed any flex problems and at a rail down heel the prop
does not hit the water. I will take some pics this weekend if you like.

Pat #130

At 09:42 PM 6/4/2007, you wrote:
>Anyone with Garhauer Davits: how long did you have them make the 
>connector piece; I thought they were a standard size and I would have 
>to cut it but they said they make it custom.
>
>I was looking at the two sets of pictures on our site and like the 
>looks of the Garhauer's but am not sure if I would mount them on the 
>lower or upper rail.  We have the more mature 320 w/o the transom step 
>so I'd be mounting to the transom in either case.
>
>Any installation hints or tips; looks pretty straight forward: 8 holes 
>and a couple of clamps.
>
>Thanks in advance,
>Lamar Desmond
>Blue Moon #358

Pat Moriarty
PSI Urethanes Inc
PH: 800-888-5156  Fax: 512-837-8733
Please visit our web site at
www.psiurethanes.com