[C320-list] Installing Hatch Tape

[Chris Burti]

Those sound like security screws and an appropriate sized security allen
wrench can be purchased at most industrial supply stores.

On 6/28/07, BAdams3491 at aol.com <BAdams3491 at aol.com> wrote:
>
> I have some silicone hatch tape to replace the original tape upon which
> the
> hatch slides.  It appears that the tape goes up under the hatch for quite
> a
> way (up under the traveler) , which means that part of the cabin top would
> have
> to be removed.  The only problem I see is that the first screws (one on
> each side of the hatch, aft end) holding the top, although a standard hex
> head,
> have some type of pin sticking up in the center which will  not permit the
> standard hex wrench to go down inside the nut so it can be turned.  Any
> suggestions as to what will remove these two screws would be  appreciated.
>
> Thanks,
>
> Bert
> At Ease
> #442
>
>
>
> ************************************** See what's free at
> http://www.aol.com.
>



-- 
Chris Burti
Farmville, NC