[C320-list] no fuel getting to motor...cont....

[Pat Moriarty]

Chris

I believe the tank if not full is just below the Racor and it will 
not gravity feed or work once you loose the prime. Now if the tank is 
full you are good to go. We all still want to know if the tank has anything

At 12:50 PM 5/22/2007, you wrote:
>There is an easier way to fill the Racor if it is empty or partially empty.
>There is a bleed screw on the top of it.  As long as the fuel tank 
>value is open and the RACOR shutoff is open then all you need to do 
>is loosen the bleed screw and she will fill up.
>
>However, it sounds like this is not the issue since it seems that 
>the line going to the RACOR is empty and nothing is coming out of 
>the tank.  However, once you figure out why gas is not coming from 
>the tank you might need to perform this operation anyways.  If you 
>do, don't forget to bleed the line going to the secondary filter as 
>well.  This is done by opening a bleed screw on the engine and you 
>can use the pump built into the RACOR filter to pump the air out of the line.
>
>Chris
>#447
>
>----- Original Message -----
>From: "Pat Moriarty" <patm at psiurethanes.com>
>To: "C320-List" <c320-list at catalina320.com>
>Sent: Tuesday, May 22, 2007 1:20 PM
>Subject: Re: [C320-list] no fuel getting to motor...cont....
>
>>Tim I use to just blow into the filler on my old motor home if it 
>>had set for a while to get gas to the carburetor because it takes a 
>>long time for the pump to suck it through 20 foot of line, so you 
>>might try to prime the Racor by the huff and puff method.
>>
>>Pat
>>
>>#130
>>
>>At 11:07 AM 5/22/2007, you wrote:
>>>I will check the spinning valve theory but not sure what you mean 
>>>about the shut off on the racor filter...can you elaborate or send 
>>>a pic? (agreed that the line before that is fueless as well so 
>>>that is more for future knowledge)
>>>
>>>   I also had the thought about a airlock and did open the fill 
>>> cap but that did not help either. I will try the compressed air 
>>> later today when I get out to the boat and will make sure the filler is open.
>>>
>>>   Thanks to all !!
>>>
>>>        Shape Yahoo! in your own image.  Join our Network Research 
>>> Panel 
>>> today!http://us.rd.yahoo.com/evt=48517/*http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 
>>> hot CTA = Join our Network Research Panel
>>
>>Pat Moriarty
>>PSI Urethanes Inc
>>PH: 800-888-5156  Fax: 512-837-8733
>>Please visit our web site at
>>www.psiurethanes.com
>>
>>

Pat Moriarty
PSI Urethanes Inc
PH: 800-888-5156  Fax: 512-837-8733
Please visit our web site at
www.psiurethanes.com