[C320-list] Keel Bolts Torque
Allan S. Field
allan.field at comcast.net
Tue Apr 15 03:59:34 PDT 2008
Bruce - My manual is silent when it comes to keel bolts. As for the keel
bolt torque schedule, according to Gerry, you are right - torque at
commissioning then at one year then never again. - Allan
-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of
bruceheyman at cox.net
Sent: Monday, April 14, 2008 10:59 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Keel Bolts Torque
Has anyone looked in the manual? Mine is down at the boat so I won't be
able to look till this weekend. I thought I read that it should be tourqued
when commissioning and then again after one year. Supposedly it never needs
to be done again.
My previous boat, a Sabre, was to be tourqued once a year to 90 ftlb. The
debate we used to get into is that should the 90 ftlb be with well oiled
threads or dry (err wet if you have a wet bilge). The consensus was that
you should back off the nut, clean up the threads if requited, lightly oil
and then torque to spec.
Bruce
Somerset 671 SoCal
Sent via BlackBerry by AT&T
-----Original Message-----
From: "Jeff Church" <jjemail at comcast.net>
Date: Mon, 14 Apr 2008 21:02:42
To:<C320-List at Catalina320.com>
Subject: Re: [C320-list] Keel Bolts Torque
Thanks fellas. I'd like to read that email if you dig it up. I emailed Gerry
to get both the 387 and 320 torque specs. If he answers, I'll pass them
along.
JeffC
----- Original Message -----
From: Orlando.Duran at AveryDennison.com
To: C320-List
Sent: Monday, April 14, 2008 8:42 PM
Subject: Re: [C320-list] Keel Bolts Torque
Ooops, sorry, I misunderstood..
----------------------------------
Regards,
OD
Sent from my BlackBerry Wireless Handheld
----- Original Message -----
From: "Allan S. Field" [allan.field at comcast.net]
Sent: 04/14/2008 06:37 PM
To: <C320-List at Catalina320.com>
Subject: Re: [C320-list] Keel Bolts Torque
Orlando - Thanks but I am looking for an e-mail he sent us, not his
address!
I have that. - Allan
-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of
Orlando.Duran at AveryDennison.com
Sent: Monday, April 14, 2008 9:30 PM
To: C320-List
Subject: Re: [C320-list] Keel Bolts Torque
Here you go:
gerard at catalinayachts.com
----------------------------------
Regards,
OD
Sent from my BlackBerry Wireless Handheld
----- Original Message -----
From: "Allan S. Field" [allan.field at comcast.net]
Sent: 04/14/2008 06:27 PM
To: <C320-List at Catalina320.com>
Subject: Re: [C320-list] Keel Bolts Torque
Karl - Do you still have Gerry's e-mail re: keel bolt torque
specifications?
When I bought a new computer in December, I lost what he sent to us.
Perhaps if you still have it you can post it here for Jeff. - Allan
-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Jeff Church
Sent: Monday, April 14, 2008 6:33 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Keel Bolts Torque
Allan
Gerry usually monitors these mail lists so if he disagreed with you I
suspect we'd have heard from him. I'm going to email him about checking
the
torque on my 387 as part of the initial commissioning, so I'll ask about
the
320 again just to make sure.
Jeff
----- Original Message -----
From: Allan S. Field
To: C320-List at Catalina320.com
Sent: Monday, April 14, 2008 6:25 AM
Subject: Re: [C320-list] Keel Bolts Torque
Jeff - My source for the keel bolt torque setting is none other than
Gerry
Douglas. At the factory tour a few years ago, he misspoke when he said
something else. Karl questioned him later and then I followed up with
him,
reminding him that he had said something else at the tour. He clarified
that he was speaking about a different boat. One of our members has
used
the 235 setting and while a challenge, was able to get it torqued to
235.
-
Allan
-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Jeff
Church
Sent: Sunday, April 13, 2008 11:54 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Keel Bolts Torque
Allan,
Just off the top, I thought the proper torque was something like 105
foot
pounds. If that is the case, 235 pounds might tear the bolts right out
of
the keel. You might want to check your source.
JeffC
----- Original Message -----
From: Allan S. Field
To: C320-List at Catalina320.com
Sent: Sunday, April 13, 2008 7:26 PM
Subject: Re: [C320-list] Keel Bolts Torque
Warren - The proper torque for the keel bolts is 235 foot pounds. The
boat
must be out of the water with at least 70% of its weight supported by
the
keel. The Association has the torque wrench, socket and extension
bars
as
part of the loaner program.
Allan S. Field
Sea Shadow - #808
Columbia, MD
-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Warren
Updike
Sent: Sunday, April 13, 2008 10:54 AM
To: c320-list at lists.catalina320.com
Subject: [C320-list] Keel Bolts Torque
What is the proper torque for the keel bolts?
Thanks,
Warren & Pattie Updike
C320, #62, 1994, "Warr De Mar"
Frog Mortar Creek, Middle River
Chesapeake Bay
- -----------------------------------------------------------------
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and delete the material from any
computer.
- -----------------------------------------------------------------
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and delete the material from any
computer.
More information about the C320-list
mailing list