[C320-list] Bilge pump not pumping
Barry Fahrer
bfahrer at lisurveyor.com
Fri Aug 15 09:23:38 PDT 2008
Are you sure of this website I am not able to access it.
BARRY --... ...--
----- Original Message -----
From: <Sail0983 at aol.com>
To: <C320-List at Catalina320.com>
Sent: Monday, August 11, 2008 14:11
Subject: Re: [C320-list] Bilge pump not pumping
>I have found PUMPQGENTS.COM to be a good source for parts. This spring I
> found that one of the welds that holds the motor mounting bracket to the
> pump
> housing had broken. I was able to purchase a new motor mount for $25.00
> and was
> able to repair the pump.
>
> Dave Marchant
> Illumination #983
> Solomons, MD
>
>
> In a message dated 8/11/2008 8:18:43 A.M. Eastern Daylight Time,
> clburti at gmail.com writes:
>
> I agree.. this is a heavy-duty user servicable pump. The pump casing is
> only
> held together by four screws and then you loosen the lock screw on the
> moter
> shaft cam to open it up.
>
> This is something you should learn to do anyway as it could be neccessary
> to
> know how to clear the pump if you are taking on water away from the dock.
> This is often the time when trash gets sucke up as well. As noted before
> a
> screen is a good idea.
>
> On Sun, Aug 10, 2008 at 9:38 PM, Paul Rickman
> <ilove2sail at verizon.net>wrote:
>
>> Take it apart, check for debris, and if it is the pump, you can get a
>> kit
>> at West Marine to rebuild it.
>> What you described sounds like debris, it's free to clean it out and
>> will,
>> in the long run, take less
>> time. Once you have it out and you still want to replace it, just
>> checking
>> it takes no more time.
>> I've been through this -- more than once. Put in a filter.
>>
>> Paul
>>
>>
>>
>> ----- Original Message ----
>> From: R Airis <rairis at comcast.net>
>> To: C320-List at Catalina320.com
>> Sent: Sunday, August 10, 2008 9:30:54 PM
>> Subject: Re: [C320-list] Bilge pump not pumping
>>
>> I belive the pump will run either way. Check your pos. & neg. feed,
> maybe
>> its wired backwards.
>>
>>
>> ----- Original Message -----
>> From: "Rick Evans" <ericstillwellevans at gmail.com>
>> To: <C320-List at Catalina320.com>
>> Sent: Sunday, August 10, 2008 4:08 PM
>> Subject: Re: [C320-list] Bilge pump not pumping
>>
>>
>> > Update on m bilge
>> >
>> > Line to the bilge is completely clear so is intake to the pump. Put
>> my
>> > hand over and seems to be pumping out not in. Anyways I think I will
>> > replace the whole unit anyone have a good supplier?
>> >
>> > Rick
>> > #724
>> > Sent via BlackBerry from T-Mobile
>> >
>> > -----Original Message-----
>> > From: "Irving Grunes" <igrunes at gmail.com>
>> >
>> > Date: Sun, 10 Aug 2008 08:32:58
>> > To: <C320-List at catalina320.com>
>> > Subject: Re: [C320-list] Bilge pump not pumping
>> >
>> >
>> > Before you disassemble the pump.
>> > Try removing the suction hose at the pump and blow it clear.
>> > Then try the pump again.
>> > It worked for me
>> > Irv Grunes
>> > Isle of Wight #851
>> >
>> > On Sun, Aug 10, 2008 at 12:05 AM, Monte B. <mjbc60 at sbcglobal.net>
>> > wrote:
>> >
>> >> The reason you are getting trash in the bilge pump valves is because
>> >> you
>> >> do
>> >> not have the screen installed in the suction line that feeds the
>> >> pump.
>> >> Mine
>> >> was in the nav. Station table when the boat was delivered. Install
>> >> the
>> >> screen in the suction line in the bilge and clean it regularly and
>> >> you
>> >> won't
>> >> have to disassemble the pump again.
>> >>
>> >> Monte
>> >> Laima #620
>> >>
>> >> -----Original Message-----
>> >> From: c320-list-bounces at lists.catalina320.com
>> >> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Rick
>> Evans
>> >> Sent: Friday, August 08, 2008 2:08 PM
>> >> To: C320-List at Catalina320.com
>> >> Subject: Re: [C320-list] Bilge pump not pumping
>> >>
>> >> Bill
>> >>
>> >> Excuse my ignorance, I would assume the one way valve is in the pump
>> >> section
>> >> of the assembly. How would I go about checking getting it out etc???
>> >>
>> >> Thanks
>> >> Rick
>> >> Sent via BlackBerry from T-Mobile
>> >>
>> >> -----Original Message-----
>> >> From: Bill MacRae <seacalling at msn.com>
>> >>
>> >> Date: Fri, 8 Aug 2008 18:56:24
>> >> To: <c320-list at catalina320.com>
>> >> Subject: Re: [C320-list] Bilge pump not pumping
>> >>
>> >>
>> >> If the pump is running and you can hear a bubbling sound coming from
>> >> the
>> >> bilge, it may be caused by a piece of debris caught in one of the
>> >> round
>> >> rubber one way valves. I had a small piece of a stripped off wire
>> >> stuck
>> >> in
>> >> mine.
>> >>
>> >> Bill
>> >>
>> >>
>> >>
>> >> > To: C320-List at Catalina320.com> From: ericstillwellevans at gmail.com>
>> >> > Date:
>> >> Fri, 8 Aug 2008 18:30:30 +0000> Subject: [C320-list] Bilge pump not
>> >> pumping>
>> >> > Just got back from a short 3 day cruise on the way back (even
>> >> > though I
>> >> know I need a new float switch) my bilge pump failed to pump water
>> >> out
>> of
>> >> the bilge. > > Electric motor pumping. > Took a hanger to both sides
> and
>> >> made sure no blockages. > > Here's the question > Can I rebuild the
>> >> diaphram
>> >> on the pump section? If so where is the best pace to get it. > > Or
>> >> do I
>> >> need to replace the whole unit?> > Would like to hear from anyone
>> with
> a
>> >> similar proble or have replaced the pump. > > Thanks> Rick> Sent via
>> >> BlackBerry from T-Mobile
>> >> _________________________________________________________________
>> >> Your PC, mobile phone, and online services work together like never
>> >> before.
>> >> http://clk.atdmt.com/MRT/go/108587394/direct/01/
>> >>
>> >>
>> >
>>
>
>
>
> --
> Chris Burti
> Farmville, NC
>
>
>
>
>
> **************Looking for a car that's sporty, fun and fits in your
> budget?
> Read reviews on AOL Autos.
> (http://autos.aol.com/cars-BMW-128-2008/expert-review?ncid=aolaut00050000000017
> )
More information about the C320-list
mailing list