[C320-list] water tanks

[Irving Grunes]

Jim
I also thought of that, Haven't done it yet.
I thought about putting the valve in the vberth portside locker that the fwd
tank line runs thru.
That way, you don't have to move anything but what is in that locker

Irv Grunes
2001 #851

On Wed, Dec 10, 2008 at 8:27 PM, jim brown <jbrown5093 at yahoo.com> wrote:

> With our boat 12 hours away, on the cradle, covered in snow I've had time
> to think. My water tank control valves are under the aft berth and I've
> looked a the website and considered the various suggestions about relocation
> so you can change tanks without making the bed. However, I thought this
> solution might be easier. Has anyone put a shut off valve on the outlet of
> the forward tank as it exits the tank? With that in the off position and
> both valves open unter the aft berth you would run only on the aft tank.
> When that ran dry you would simply open the forward valve and the tank would
> drain into the aft tank. It seems a simpler solution that all the
> re-plumbing and relocating of both valves. Just open and close one valve
> under the drawer in the forward berth.  AmI missing something? Jim Brown
>  Desafinado 1003
>
>
>
>
>