[C320-list] Need drive belt

[Monte B.]

Bill,

Still in a state of confusion. Called Callahan and spoke with Pat. She found
that they had shipped belts to you and Michael but they were 10MM instead of
7.5 width. Will the 10MM width belt work in the autopilot drive or is it the
wrong size?

Monte
Laima #620

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Bill MacRae
Sent: Wednesday, April 30, 2008 7:32 AM
To: c320-list at catalina320.com
Subject: Re: [C320-list] Need drive belt


Hi Monte,
 
You are right, I misread ATS, It is actually AT5 750 075.  It is the correct
size belt.  I took the number off the belt this past weekend and the 5
looked like a S.
 
The AT5 is a type of timing belt that has a 5MM pitch
750 is the length of 750MM 
075 is the width of 7.5MM
 
Sorry for the confusion.
 
Bill
> From: mjbc60 at sbcglobal.net> To: C320-List at Catalina320.com> Date: Tue, 29
Apr 2008 16:58:37 -0500> Subject: Re: [C320-list] Need drive belt> >
Michael,> > Been reading the dialogue on the belt replacement issue. Called
Callahan and> didn't order a belt because they have changed the part # and I
am not sure> it is the same belt. (Don't think it's not, just don't know) I
also have a> 4000+ wheelpilot and have never lost the belt so it must be
time for at> least a spare. If, after you receive these belts and can
confirm that they> are correct, could you post it so us cheap guys can know
we ordered the> correct spare. Bill, thanks for the info. Raymarine is not
particularly> sensitive to this issue as when I asked for the belt specs. I
was told he> (name withheld to protect the guilty) would try to find out and
I could call> back in a couple of days. This is the new version of customer
support.> > Monte> Laima #620> > -----Original Message-----> From:
c320-list-bounces at lists.catalina320.com>
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Michael>
Ferguson> Sent: Tuesday, April 29, 2008 8:41 AM> To:
C320-List at Catalina320.com> Subject: Re: [C320-list] Need drive belt> > Bill>
Thanks very much for the belt info. I contacted George and he is shipping 3>
belts out for me and a friend with the same auto helm.> Sure do appreciate
it> Michael> Nauti Clew 169> > > On 4/28/08 8:33 AM, "Bill MacRae"
<seacalling at msn.com> wrote:> > > > > Michael,> > > > This is what is printed
on the replacement belt. Ametric ATS 750 MADE IN> > FRANCE 075> > > > This
works fine on my 1998. I don't know if they made any changes over> the> >
years.> > > > You could check locally or give George a call at Callahan
Bearing> > 215-368-4000. I'm sure they could drop ship it to you.> > > >
Bill> Date: Fri, 25 Apr 2008 12:24:34 -0400> From: coralman at bellsouth.net>>
To:> > C320-List at Catalina320.com> Subject: Re: [C320-list] Need drive belt>
>> Thanks> > Bill > I would appreciate it very much> Michael> > > On 4/25/08
8:19 AM,> "Bill> > MacRae" <seacalling at msn.com> wrote:> > > > > A few years
ago, I had a> local> > bearings and power transmission business match> > the
belt. It works great> and> > it was half the cost. I think I have the> >
manufacurer and part number on> the> > boat. I can check this weekend.> > >
> Bill> > > >> From:> > coralman at bellsouth.net> To:
C320-List at Catalina320.com> Date: Thu, 24> >>> Apr> > 2008 21:59:30 +0000>
Subject: Re: [C320-list] Need drive belt> > > > Yes>> >>> > that is the kit
I need but they are sold out and not making anymore. I> can> >>> > send it
in for service but what is happening now is they upgrade the unit> to>> > >>
the new cable drive unit for about 350.00. My unit is working now and> the>>
> >> belt is good. Just wanting one for backup when this one breaks. The>
last>> > >> belt broke with about 300 hours on it. > Thanks> Michael>
--------------> >>> > Original message from "Joe Abbagnaro"
<jabbagna at gmail.com>:> --------------> >>> > >> > > I see thsi service kit
on the Raymarine site.> > Is this what you> need> > ?>> >> > How old is the
ST4000 ?> > > >> >>> >>
http://www.raymarine.com/ProductDetail.aspx?SITE=1&SECTION=2&PAGE=913&PRODUC
> T>> > >> =21> > 23> > > > Joe> > > > On 4/24/08, Joe Barrett wrote:> > >
Can't> you>> > >> just send the unit to Raymarine for repair?> > > Joe> > >>
> >> > >> >>> > ------------------------------------> > > Dolphin Commercial
Capital> > >>> >>> > Joseph T. Barrett jr.> > > President> > >>
joe at dolphincommercialcapital.com> >>> > >> > 9010 Strada Stell Court> > >
Suite 209> > > Naples, Florida 34109> >> >> >> > >> >> In The Vanderbilt
Galleria> > > tel: 239-597-2266> > >> > tel2:1-800-264-4119> >> >> > fax:
239-597-7276> > > mobile: 239-777-1880>> > >>> > >>
www.dophincommercialcapital.com> > >> ------------------------------------>>
> >> >> >> > > -----Original Message-----> > > From:> >>> >
c320-list-bounces at lists.catalina320.com> > >> >>> >
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Michael> >> >>
>>> > Ferguson> > > Sent: Wednesday, April 23, 2008 4:10 PM> > > To:> >>> >
C320-List at Catalina320.com> > > Subject: [C320-list] Need drive belt> > >>> >
>>> > >> I am in need of a st4000 drive belt # D160 from Raymarine. They no>
longer>> > >> >> > make the unit or supply the belt. Hoping someone has one
or more> they>> > >> would> > > like to sell.> > > Thanks> > > Michael> > >
Nauti Clew 169>> > >>> > >> >> >> > >> > >> > >> > >> >> >
_________________________________________________________________> >>
Express> > yourself wherever you are. Mobilize!> >> >>
http://www.gowindowslive.com/Mobile/Landing/Messenger/Default.aspx?Locale=en
> -U> > > > S?ocid=TAG_APRIL> >> >
_________________________________________________________________> > In a
rush? Get real-time answers with Windows Live Messenger.> >>
http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refresh
> _r> > ealtime_042008> > 
_________________________________________________________________
Back to work after baby-how do you know when you're ready?
http://lifestyle.msn.com/familyandparenting/articleNW.aspx?cp-documentid=579
7498&ocid=T067MSN40A0701A=