[C320-list] Bilge Float Pump Switch

[Rick Evans]

I checked behind the panel and along any exposed lines and didnt find
anything.  Although I think it is a very good idea to have one and Im glad
they added one.



On Mon, Jul 21, 2008 at 12:41 PM, Paul Rickman <ilove2sail at verizon.net>
wrote:

> On the first switch, I did a complete install before testing.
> That meant I had to cut it out and use a second round
> of new parts. Had I tested it out before completing the
> job it would have been much easier. Also, only one
> size fits in the bilge, the very first one I bought would not
> fit between the keel bolts. Sorry I don't know about
> the fuse.
>
>
>
> ----- Original Message ----
> From: Rick Evans <ericstillwellevans at gmail.com>
> To: C320-List at Catalina320.com
> Sent: Monday, July 21, 2008 12:01:04 PM
> Subject: Re: [C320-list] Bilge Float Pump Switch
>
> Ok will do. Any hints tips etc?
> ------Original Message------
> From: Paul Rickman
> Sender: c320-list-bounces at lists.catalina320.com
> To: C320-List at Catalina320.com
> ReplyTo: C320-List at Catalina320.com
> Sent: Jul 21, 2008 12:00 PM
> Subject: Re: [C320-list] Bilge Float Pump Switch
>
> I replaced mine last year. The first one was also bad, so I had to get a
> second one.
> Point being, test it before finishing up on the job.
> Paul
> Affinity 657
> Bay Bridge Marina
>
>
>
> ----- Original Message ----
> From: Rick Evans <ericstillwellevans at gmail.com>
> To: C320-List at catalina320.com
> Sent: Monday, July 21, 2008 11:48:38 AM
> Subject: [C320-list] Bilge Float Pump Switch
>
> I figured I would ask here before I replace the switch.
>
> Does anyone know if there is an inline fuse for the bilge float switch?
>
> mine seems to be dead and so I looked best I could to see if there was an
> inline fuse but have not located one.
>
> Also has anyone replaced the switch and have any helpful hints or tips they
> would be much appreciated.
>
> Thanks
> Rick
> A Careful Wish #724
>
>
> Sent via BlackBerry from T-Mobile
>