[C320-list] Bilge Float Pump Switch

[Paul Rickman]

On the first switch, I did a complete install before testing.
That meant I had to cut it out and use a second round
of new parts. Had I tested it out before completing the
job it would have been much easier. Also, only one
size fits in the bilge, the very first one I bought would not
fit between the keel bolts. Sorry I don't know about
the fuse.



----- Original Message ----
From: Rick Evans <ericstillwellevans at gmail.com>
To: C320-List at Catalina320.com
Sent: Monday, July 21, 2008 12:01:04 PM
Subject: Re: [C320-list] Bilge Float Pump Switch

Ok will do. Any hints tips etc?
------Original Message------
From: Paul Rickman
Sender: c320-list-bounces at lists.catalina320.com
To: C320-List at Catalina320.com
ReplyTo: C320-List at Catalina320.com
Sent: Jul 21, 2008 12:00 PM
Subject: Re: [C320-list] Bilge Float Pump Switch

I replaced mine last year. The first one was also bad, so I had to get a second one.
Point being, test it before finishing up on the job.
Paul
Affinity 657
Bay Bridge Marina



----- Original Message ----
From: Rick Evans <ericstillwellevans at gmail.com>
To: C320-List at catalina320.com
Sent: Monday, July 21, 2008 11:48:38 AM
Subject: [C320-list] Bilge Float Pump Switch

I figured I would ask here before I replace the switch.

Does anyone know if there is an inline fuse for the bilge float switch?

mine seems to be dead and so I looked best I could to see if there was an
inline fuse but have not located one.

Also has anyone replaced the switch and have any helpful hints or tips they
would be much appreciated.

Thanks
Rick
A Careful Wish #724


Sent via BlackBerry from T-Mobile