[C320-list] C320.......air conditioning

[Michael Ferguson]

I have a Mermaid 16500 installed starboard side above the fuel tank. Control
panel at nav station and intake in aft birth with hole cut direct to unit.
Vents are above refrig and port side cabin wall and in head behind sink.
Would do 12500 if to do over so my 2000 honda would run it. Now I have to
use 2 hondas for starting it.
Michael
Nauti Clew 169


On 6/3/08 6:05 PM, "Paul Rickman" <ilove2sail at verizon.net> wrote:

> Two 8K condenser units, one in the port side of the V-berth, with two air
> outlets, one to the saloon, the other to the V-birth. Air intake is also on
> the port side of the back portion of the V-berth next to the door.
>  
> The other unit is on the starboard side aft, in the locker. Air intake right
> on the other side of the unit in the master cabin.. Two outlets, one in the
> master cabin and one in the head. Works really well, keeps the boat cool and
> warm when needed. The only complaint is
> the noise, it is right by your head when you sleep. At least one A/C person
> told me it was over done. But I don't think so.
>  
> Paul
> Affinity, 657
> Bay Bridge Marina
>  
>  
> 
> 
> 
> ----- Original Message ----
> From: John Finch <JFinch at pbgbuilders.com>
> To: C320-List at Catalina320.com; c320-list at lists.catalina320.com
> Sent: Tuesday, June 3, 2008 5:45:23 PM
> Subject: [C320-list] C320.......air conditioning
> 
> Has anyone installed air conditioning in their C320?  If so, what size unit,
> and where did you locate the unit, and the duct work?  How many outlets, and
> where did you locate those?
> 
> 
> 
> Thanks,
> 
> 
> John Finch
> "Iniki II"
> 1998 C320
> Hull 530
> Kentucky Lake
> New owner, May 2008
> 
> 
> 
> 
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of warren updike
> Sent: Tuesday, June 03, 2008 4:47 PM
> To: c320-list at lists.catalina320.com
> Subject: [C320-list] Attaching jib sheets
> 
> How are people attaching jib sheets to the jib?  I've been using a bowline;
> but, don't like it as it tends to catch on the shrouds on a tack.  I'm
> thinking about an anchor bend (fisherman's bend) and seizing the bitter end
> to the working part.  Any better ideas?
> 
> 
> Warren & Pattie Updke
> Catalina 320, #62, "Warr De Mar"
> Middle River, Chesapeake Bay
> 
> 
> 
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of
> c320-list-request at lists.catalina320.com
> Sent: Saturday, May 31, 2008 4:07 PM
> To: c320-list at lists.catalina320.com
> Subject: C320-list Digest, Vol 111, Issue 1
> 
> Send C320-list mailing list submissions to
>     c320-list at lists.catalina320.com
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>     http://lists.catalina320.com/listinfo.cgi/c320-list-catalina320.com
> or, via email, send a message with subject or body 'help' to
>     c320-list-request at lists.catalina320.com
> 
> You can reach the person managing the list at
>     c320-list-owner at lists.catalina320.com
> 
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of C320-list digest..."